619940
17
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
Making/Answering Calls
17
2 To return to the conversation, press 1
again.
Recall/flash
{R} on the base unit or {R/E} on the handset
allows you to use the special features of your host
PBX such as transferring an extension call, or
accessing optional telephone services.
Note:
L To change the recall/flash time, see page 24.
For call waiting or Call Waiting Caller
ID service users
To use call waiting, you must first subscribe to the
call waiting service of your service provider/
telephone company.
This feature allows you to receive calls while you
are already talking on the phone. If you receive a
call while on the phone, you will hear a call waiting
tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd caller’s
information is displayed on the base unit or
handset that is in use after you hear the call waiting
tone.
1 Press {R} on the base unit or {R/E} on the
handset to answer the 2nd call.
2 To switch between calls, press {R} on the
base unit or {R/E} on the handset.
Note:
L Please contact your service provider/telephone
company for details and availability of this
service in your area.
Temporary tone dialling (for
rotary/pulse service users)
You can temporarily switch the dialling mode to
tone when you need to access touch-tone services
(for example, telephone banking services).
1 Make a call.
2 Press {*} when prompted to enter your code
or PIN, then press the appropriate dial keys.
Note:
L The dialling mode will return to pulse when you
hang up.
Call share
You can join an existing outside call.
Important:
L To prevent other users from joining your
conversations with outside callers, turn the
privacy mode on (page 24).
To join the conversation, lift the corded handset
when the handset is on an outside call.
To join the conversation, press {C} when the
other unit is on an outside call.
Note for base unit and handset:
L A maximum of 3 parties (including 1 outside
party) can join a conversation.
Handset key lock
The handset can be locked so that no calls or
settings can be made. Incoming calls can be
answered, but all other functions are disabled
while key lock is on.
To turn key lock on, press 8 (middle soft key) for
about 3 seconds.
L & is displayed.
L To turn key lock off, press & (middle soft key)
for about 3 seconds.
Note:
L Calls to emergency numbers cannot be made
until key lock is turned off.
= Base unit / Y Handset
= Base unit / Y Handset
= Base unit / Y Handset
= Base unit
Y Handset
Y Handset
TG6451_6461FX(e-e).book Page 17 Monday, May 4, 2009 8:55 AM
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

panasonic-kx-tg6451

Suche zurücksetzen

  • Wie kann ich denn beim 6461g eine gesperrte Telefonnummer wieder entsperren? Eingereicht am 3-8-2020 09:47

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic KX-TG6451 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info