Bedienungsanleitung Panasonic KX-VC300 (Seite 92 von 172) (Englisch)

628266

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Adding Contacts to the

Contact List

You can register the information of up to 300 contacts

in the contact list.

Note

• If

a video conference call is received while data

is being entered, a dialogue box to confirm if you

answer a video conference call is displayed.

Use [

][ ]

to select "Yes" or "No" and press

[Enter].

– When "Yes" is selected, you can answer a

video conference call while any unsaved

data is lost.

– When "No" is selected, you can continue

entering the data.

• You can use the administrator menu to prohibit

adding, editing, and deleting items in the

contacts list (Page 123).

Registering a New Contact

Registering a Single-party Contact

1. Press [Menu].

• The Menu screen is displayed.

2. Use [

][ ] to select "New Contact" and press

[Enter].

• The

contact list registration screen is displayed.

3. Use [ ][ ]

to select the following items for input:

"Group/Site": Enter a name for the contact (up to

24 characters) (Page 137).

"Speed Dial": Enter a speed dial number (1–300).

"Max. Bandwidth": Press [Enter] and use [

]

[ ] to select the maximum allowed bandwidth to

be used (256 kbps, 384 kbps, 512 kbps,

768 kbps, 1.0 Mbps, 1.2 Mbps, 1.5 Mbps,

2.0 Mbps, 2.5 Mbps, 3.0 Mbps, 3.5 Mbps,

4.0 Mbps, 4.5 Mbps, 5.0 Mbps, 5.5 Mbps,

6.0 Mbps, 6.5 Mbps, 7.0 Mbps, 7.5 Mbps,

8.0 Mbps, 8.5 Mbps, 9.0 Mbps, 10.0 Mbps, Not

Specified [default]).

Note

• When "Not Specified" is selected, the

maximum bandwidth that is set on the

connection settings screen

(Page 98), or

on the select local site screen when a local

site is selected (Page 131) is applied.

• The maximum bandwidth during a video

conference call adjusts to that of the party

that has set the lowest bandwidth for the

maximum bandwidth setting among all

participating parties.

• Video conferences cannot use more

bandwidth than the maximum bandwidth

setting set by your dealer. For details,

contact your dealer.

• When you make a 3-party video conference

call, select "1.0 Mbps" or a higher setting.

If a lower setting is selected, there may be

problems with video or audio quality.

• When you make a 4-party video conference

call, select "1.5 Mbps" or a higher setting.

If a lower setting is selected, there may be

problems with video or audio quality.

"Call Type": Use [

][ ] to select the call type

(SIP or H.323).

"Multi-Point": Use [ ][ ] to select "No".

"Address": Enter an IP address (or host name),

SIP URI (or SIP user name), H.323 extension, H.

323

name, or MCU’s conference room number@IP

address.

Note

• When entering an IP address, if the IP

address

contains 1 or 2 digit numbers, enter

these numbers as they are. Do not enter like

[.001].

Example: The IP address is [192.168.0.1].

– Correct entry: [192.168.0.1]

– Wrong entry: [192.168.000.001]

92 User Manual Document Version 2013-09

Contacts and Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-VC300 Seite 92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info