Bedienungsanleitung Panasonic KX-VC300 (Seite 93 von 172) (Englisch)

628266

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

• See Page 40 for details about the

characters that can be input for address

entry.

• If

the other party has the same SIP domain

name as yours, you can register only their

SIP user name. If the other party has a

different SIP domain name from yours, their

SIP domain name must be entered along

with their SIP user name.

• If the SIP domain name is not entered, your

own SIP domain name is automatically

appended to the registered contact. This

may result in a different, unintended party

being registered as a contact, so be careful

when entering a contact’s information.

• When using H.323, you can also call by

entering the other party’s IP address (or

host name) %H.323 extension number (or

H.323 name).

• Enter a standards-compliant value.

For details, contact your network

administrator.

4. Press [G].

• A dialogue box to confirm the saving of settings

is displayed.

5. Use [

][ ] to select "Yes" and press [Enter].

• The contact list screen is displayed.

Note

• To continue entering another contact, press

[B] and repeat steps 3–5.

6. Press [Home].

• The Home screen is displayed.

Registering a Multiple-party Contact

Note

• When using H.323, you cannot register a

multiple-party contact.

• If you are using the KX-VC300, registering a

multiple-party contact can only be done after

purchasing an activation key card

(KX-VCS301) to activate multiple

-party video

conference calls (Page 127). For details about

the activation key, contact your dealer.

1. Press [Menu].

• The Menu screen is displayed.

2. Use [ ][ ] to select "New Contact" and press

[Enter].

• The

contact list registration screen is displayed.

3. Use [ ][ ]

to select the following items for input:

"Group/Site": Enter a name for the video

conference call (up to 24 characters) (Page 137).

"Speed Dial": Enter a speed dial number (1–300).

"Multi-Point": Use [

][ ] to select "2 sites" or

"3 sites".

For "Site 1"/"Site 2"/"Site 3": Use the following

procedure to select these from the contact list

screen.

1. Use [ ][ ] to select "Site 1", "Site 2" or

"Site 3".

2. Press [Enter].

• The contact list screen is displayed.

3. Select a contact using [

][ ].

• You can use [

][ ] or the numeric

buttons of the remote control to select the

displayed tab (Page

45).

4. Press [Enter].

• The contact list registration screen is

displayed.

Note

• When "Multi-Point" is set to "2 sites" or

"3 sites", the maximum bandwidth that is

set on the connection settings screen

(Page 98), or on the select local site

screen when a local site is selected

(Page 131) is applied.

4. Press [G].

• A

dialogue box to confirm the saving of settings

is displayed.

5. Use [

][ ] to select "Yes" and press [Enter].

• The contact list screen is displayed.

Document Version 2013-09 User Manual 93

Contacts and Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-VC300 Seite 93

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info