Bedienungsanleitung Panasonic Lumix DMC-LS2 (Seite 85 von 104) (Englisch)

103520

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Others

VQT0V10

∫ Card

Do not leave the card where the

temperature is high, where

electromagnetic waves or static

electricity are easily generated or

exposed to direct sunlight.

Do not bend or drop the card.

• The card may be damaged or the recorded

content may be damaged or deleted.

• Put the card in the card case or the

storage bag after use and when storing or

carrying the card.

• Do not allow dirt, dust or water to get into

the terminals on the back of the card and

do not touch the terminals with your

fingers.

∫ Batteries

Be sure to remove the batteries when

you will not be using the camera for a

long period of time.

• If the temperature is too high or low, the

terminals may rust causing a malfunction.

If you drop the batteries accidentally,

check to see if the body of the batteries

and the terminals are damaged.

• Inserting a damaged battery in the

camera will damage the camera.

Bring charged spare batteries when

going out.

• Be aware that the operating time of the

batteries becomes shorter in low

temperature conditions such as at a ski

resort.

Dispose of unusable batteries.

• Batteries have a limited life.

• Do not throw batteries into fire because

they may cause an explosion.

• Unusable batteries should be discarded in

accordance with battery recycling laws.

Call the RBRC hotline on 1-800-822-8837

for information.

Do not allow battery terminals to come

into contact with metal objects (such as

necklaces, hairpins, etc.).

• This can cause short circuiting or heat

generation and you may be badly burned

if you touch the batteries.

Message Display

Confirmation messages or error messages

will be displayed on the screen in some

cases.

The major messages are described below

as examples.

[CURRENT BATTERY TYPE SETTING:

OXYRIDE]/[CURRENT BATTERY TYPE

SETTING: ALKALINE/Ni-MH]

This message is displayed the first time you

insert batteries and when the batteries are

exhausted and you replace them. If the

battery type being used is different from the

one indicated in the message, change the

battery type in [BATTERY TYPE] in the

[SETUP] menu. (P20)

[THIS MEMORY CARD IS PROTECTED]

The Write-Protect switch on the SD

Memory Card is moved to [LOCK]. Move

the switch back to unlock it. (P17, 71)

[NO VALID PICTURE TO PLAY]

Record a picture or insert a card with a

recorded picture and then play it.

[THIS PICTURE IS PROTECTED]

Delete or overwrite the picture after

canceling the protect setting. (P70)

[THIS PICTURE CANNOT BE DELETED]/

[SOME PICTURES CANNOT BE

DELETED]

Pictures not based on the DCF standard

cannot be deleted. If you want to delete

some pictures, format the card after saving

necessary data on a PC etc. (P74)

VQT0V10ENG.book 85 ページ２００５年１２月２７日　火曜日　午後８時３４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic Lumix DMC-LS2 Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic Lumix DMC-LS2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info