Bedienungsanleitung Panasonic Lumix DMC-LS2 (Seite 86 von 104) (Englisch)

103520

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Others

VQT0V10

[NO ADDITIONAL DELETE SELECTIONS

CAN BE MADE]

You have exceeded the number of pictures

that can be set at once with

[MULTI DELETE]. Delete the selected

pictures and then select [MULTI DELETE]

again to delete any remaining pictures.

More than 999 favorites have been set.

[CANNOT BE SET ON THIS PICTURE]/

[CANNOT BE SET ON SOME PICTURES]

If the pictures are not based on the DCF

standard, the DPOF print cannot be set.

[NOT ENOUGH SPACE ON BUILT-IN

MEMORY]/[NOT ENOUGH MEMORY IN

THE CARD]

There is no space left on the built-in

memory or the card.

• When you copy pictures from the built-in

memory to the card (batch copy), the

pictures are copied until the capacity of

the card becomes full.

[SOME PICTURES CANNOT BE

COPIED]/[COPY COULD NOT BE

COMPLETED]

The following pictures cannot be copied.

• When a picture with the same name as

the picture to be copied exists in the copy

destination.

• Files not based on the DCF standard.

Moreover, pictures recorded or edited by

other equipment may not be copied.

[BUILT-IN MEMORY ERROR

FORMAT BUILT-IN MEMORY?]

This message will be displayed when you

format the built-in memory on the PC or

remove the batteries without turning the

camera off. Format the built-in memory on

the camera again. (P74) The data on the

built-in memory will be deleted.

[MEMORY CARD ERROR

FORMAT THIS CARD?]

The card format cannot be recognized by

the camera. Format the card again with the

camera after saving necessary data on a

PC etc. (P74)

[PLEASE TURN CAMERA OFF AND

THEN ON AGAIN]

This message appears when the camera is

not operating properly. Turn the camera off

and on. If the message persists, contact the

dealer or your nearest servicenter.

[MEMORY CARD ERROR

PLEASE CHECK THE CARD]

• An error has occurred accessing the card.

Insert the card again.

• A card with a capacity more than 2 GB is

inserted. Do not use a card with a

capacity more than 2 GB.

[READ ERROR

PLEASE CHECK THE CARD]

An error has occurred reading the data.

Insert the card again. Make sure the card is

inserted properly and then play back again.

[WRITE ERROR

PLEASE CHECK THE CARD]

An error has occurred writing the data.

Turn the camera off and remove the card.

Insert the card again and turn the camera

on. Make sure the camera is turned off

before removing or inserting the card to

avoid damage.

[MOTION RECORDING WAS

CANCELLED DUE TO THE LIMITATION

OF THE WRITING SPEED OF THE

CARD]

• Depending on the type of SD Memory

Card, recording may stop in the middle.

• We recommend using a Panasonic SD

Memory Card.

[A FOLDER CANNOT BE CREATED]

A folder cannot be created because there

are no remaining folder numbers that can

be used. (P76)

Format the card after saving necessary

data on a PC etc. (P74)

VQT0V10ENG.book 86 ページ２００５年１２月２７日　火曜日　午後８時３４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic Lumix DMC-LS2 Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic Lumix DMC-LS2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info