103520
88
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
Others
88
VQT0V10
5: The recorded picture is blurred. The
optical image stabilizer is not
effective.
The shutter speed will become slower
and the optical image stabilizer function
may not work properly when taking
pictures especially in dark places. In
this case, we recommend holding the
camera firmly with both hands when
taking pictures. (P24) When
[SLOW SHUTTER] (P64) is set, we
recommend using a tripod and the
self-timer (P41) when taking pictures.
6: The recorded picture looks rough.
Noise appears on the picture.
Is the ISO sensitivity high or the shutter
speed slow?
(ISO sensitivity is set to [AUTO] when
the camera is shipped. Therefore, when
taking pictures indoors etc. the ISO
sensitivity increases.)
Decrease the ISO sensitivity. (P61)
Set [PICT.ADJ.] to [NATURAL]. (P65)
Take pictures in bright places.
7: Motion picture recording stops in the
middle.
Are you using a MultiMediaCard?
This unit does not support
MultiMediaCards.
Depending on the type of SD Memory
Card, recording may stop in the middle.
We recommend using a Panasonic SD
Memory Card.
LCD monitor
1: The LCD monitor is turned off
sometimes when the camera is turned
on.
Is the LCD monitor turned off soon after
you take pictures with the flash?
While the flash is being charged, the
LCD monitor is turned off.
2: The LCD monitor becomes darker or
brighter for a moment.
This phenomenon appears when you
press the shutter button halfway to set
the aperture value and does not affect
the recorded pictures.
3: The LCD monitor flickers indoors.
The LCD monitor may flicker for a few
seconds after turning the camera on
indoors under fluorescent light.
This is not a malfunction.
4: The LCD monitor is too bright or dark.
Adjust the brightness of the screen.
(P20)
Is the camera in high angle mode?
(P37)
5: Black, red, blue and green dots
appear on the LCD monitor.
These pixels do not affect the recorded
pictures.
This is not a malfunction.
6: Noise appears on the LCD monitor.
In dark places, noise may appear to
maintain the brightness of the LCD
monitor.
This does not affect the pictures you are
recording.
7: A vertical line appears on the LCD
monitor.
This is a phenomenon called smear. It
is a characteristic of CCD and appears
when the subject has a bright part. This
is not a malfunction. It is recorded in
motion pictures but is not recorded on
still pictures.
Flash
1: The flash is not activated.
Is the flash setting set to Forced OFF
[]?
Change the flash setting. (P38)
The flash is not activated when motion
picture mode [ ], [SCENERY] (P49),
[NIGHT SCENERY] (P50),
[FIREWORKS] (P52) or [STARRY SKY]
(P52) in scene mode is selected.
VQT0V10ENG.book 88 ページ 2005年12月27日 火曜日 午後8時34
88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic Lumix DMC-LS2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic Lumix DMC-LS2

Panasonic Lumix DMC-LS2 Bedienungsanleitung - Holländisch - 96 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info