Bedienungsanleitung Panasonic nv fj 628 (Seite 10 von 24) (Englisch)

135564

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Recording

1) Insert a video cassette with an intact erasure prevention

tab.

• If it has already been inserted, press the [VCR-ON/

OFF] (1) to turn the VCR on.

2) Select the TV station using the [Channel]

(33). (Set the [VCR/TV] (23) to [VCR].)

• It is also possible to select by pressing

the [Numeric] (2).

3) Press the [REC] (28) to start recording.

4) Press the [Stop] (9) to stop recording.

To Select the Desired Tape Speed

Press the [SP/LP/EP] (21) before recording.

• SP provides standard recording time and

optimum picture quality.

LP provides double recording time with

slightly reduced picture quality.

EP provides triple recording time with slightly reduced

picture quality.

To Pause Recording

Press the [Pause/Slow] (29) during

recording.

Press it again to continue recording.

To View One TV Programme while

Recording Another TV Programme

After pressing the [REC] (28) to start recording, select on

your TV the programme position of the TV programme that

you want to view.

Notes:

• When playing back an E300 cassette recorded in the LP or EP

mode, some picture distortion may occur. However, this is not a

malfunction.

• The recording pause mode will be automatically cancelled after 5

minutes and return to the stop mode.

• The tape recorded in the EP mode on this VCR cannot be played

back on the other VCR without EP mode function.

• On the other VCR (even with EP mode function), when you play

back the tape recorded in the EP mode, the picture may be

distorted. However, this is not a malfunction.

To Display the Approximate Remaining

Tape Time

See page 19 to set the tape length.

Press the [OSD/DISPLAY] (18) repeatedly until the

remaining tape time appears on the VCR display.

• Pressing the [OSD/DISPLAY] (18) once makes the On

Screen Display appear; after that, pressing it repeatedly

changes the indication in the following order.

• For certain cassettes, the remaining tape time may not be

displayed correctly.

Clock#Counter#Remaining Tape Time#Clock

To Select the Recording Duration and

Perform Timer Recording

(OTR=One-Touch Recording)

1) Press the [REC/OTR] (48) to start recording.

2) Press the [REC/OTR] (48) on the VCR

repeatedly to

select the desired recording duration.

• Every time you press this button, the recording duration

indicated in the VCR display changes in the following

order.

Counter display (normal recording mode)

#30 (min.)#60 (min.)#120 (min.)

#180 (min.)#240 (min.)

#Counter display (normal recording mode)

To stop the OTR recording before the end

Press the [Stop] (9).

Note:

• This function also works during Direct TV Recording.

(For NV-FJ732EE and NV-FJ632EE)

To Prevent Accidental Erasure of

Recorded Contents

Break out the erasure prevention

tab after recording.

If you insert a video cassette with a

broken out erasure prevention tab

and press the [REC] (28), the [1]

indication flashes on the VCR

display to indicate that recording is not possible.

In this case, cover the tab hole with two layers of adhesive

tape.

To Immediately Record the Same TV

Programme That You Are Viewing on the

(Direct TV Recording)

(For NV-FJ732EE and NV-FJ632EE)

This function allows you to immediately start recording the

same programme that you are viewing on the TV.

The programme position selected on the VCR automatically

changes to that of the TV programme that you are viewing

on the TV.

• Your TV must be equipped with the [Q Link] function.

• The VCR must be connected to the TV via a fully-wired

21-pin Scart cable.

1) Press the [DIRECT TV REC] (36).

• Recording of the TV programme that you are viewing on

the TV starts.

• In some cases, it may not be possible to change the

programme position on the TV during Direct TV

Recording.

• Do not press the [AV LINK] (35) during Direct TV REC,

otherwise the recording may not be performed correctly.

2) Press the [Stop] (9) to stop recording.

REC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic nv fj 628 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info