Bedienungsanleitung Panasonic nv fj 628 (Seite 11 von 24) (Englisch)

135564

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Recording from an external source

Recording from an external source, for example from a video

movie camera, can be performed.

• Connect your VCR to a TV using only RF coaxial cable.

(For NV-FJ628EE) (Seepage 8.)

• Connect a video movie camera or a VCR to this VCR, as

shown in the illustration.

• Press the [INPUT SELECT] (3) to select the AV Input

according to the socket on the VCR to which the source

unit has been connected.

A1: When connected to the AV1 21-pin Scart socket

A2: When connected to the AV2 21-pin Scart socket

(For NV-FJ732EE and NV-FJ632EE)

• Make sure that [AV2] is set to [EXT]. (See page 20.)

A3: When connected to the Video Input socket and Audio

Input sockets on the front panel of the this VCR

(For NV-FJ732EE)

• Use the L connector for operations in the normal

(monaural) mode.

(For NV-FJ628EE)

AV: When connected to the AV1 21-pin Scart socket

• Make sure that [AV] is set to [TV/EXT]. (See page 20.)

1) Press the [Play] (26) to start playback.

2) At the point where you want to join a new scene, press

the [Pause/Slow] (29) to put it in the still playback mode.

3) Press the [REC] (28) to put it in the recording pause

mode.

• If you leave the VCR in the recording pause mode for

more than 5 minutes, the VCR automatically switches

over to the stop mode to protect the video heads.

4) Start playback on the source unit and search for the point

from which you want to record (copy) onto this VCR.

5) When that point is reached, press the [Pause/Slow] (29)

again to start recording the new picture and sound from

the playback unit.

6) To record (copy) additional scenes, press the [Pause/

Slow] (29) to put this VCR in the recording pause mode

and then perform above step again.

7) At the point where you want to stop recording, press the

[Stop] (9) to finish recording.

Hint:

• The new sound is recorded on both the Hi-Fi audio tracks and the

normal audio track. The sound recorded on the normal audio track

is always in mono.

Satellite or Digital Receiver

Connecting the VCR to a Satellite

Receiver or Digital Receiver

If the satellite receiver is equipped with a 21-pin scart socket

• Connect your VCR to a TV using only RF coaxial cable.

(For NV-FJ628EE) (See page 8.)

1 Satellite receiver (not supplied)

2 21-pin Scart socket

• If your satellite receiver has a VCR socket, connect the cable to it.

3 21-pin Scart cable (not supplied)

Set [AV2] to [EXT], [EXT LINK 1] or [EXT LINK 2].

(For NV-FJ732EE and NV-FJ632EE)

Set [AV] to [TV/EXT], [EXT LINK 1] or [EXT LINK 2].

(For NV-FJ628EE)

For details, see page 20.

If the satellite receiver is not equipped with a 21-pin scart

socket

1 Satellite receiver (not supplied)

2 Aerial Input socket

3 Aerial Output socket

4 Aerial (not supplied)

5 Aerial lead (not supplied)

6 RF coaxial cable (not supplied)

Hint:

• The RF output channel of the satellite receiver should be adjusted

away from channel 38, which is used by the VCR, e.g. re-adjust to

channel 33.

AV3 IN

INTELLIGENT TIMER

AV2

(

DECODER/DECODEUR/EXT

)

AV1

(

)

VIDEO

L/MONO

AUDIO

Video movie camera

Other VCR

(42) (43) (51) (52)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic nv fj 628 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info