Bedienungsanleitung Panasonic NV-HS820EE (Seite 15 von 26) (Englisch)

53884

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

DATE

SP/LP/EP

If [ ––] Appears under [Pos/Name] after

Entering a ShowView Number

Pos/Name stands for Programme Position/TV Station Name.

Normally, the name of the TV station or the number of the

programme position is displayed under [Pos/Name].

However, if the [––] indication appears, follow the operation

steps below.

Press the [Channel] button repeatedly to select the

programme position on which the TV programme to be

recorded will be broadcast.

After you have entered the information of a TV station, it

remains stored in the VCR’s memory, and you do not need to

enter it again in the future.

Setting the Recording Date/Day(s)

Press the [DATE] button to select the recording date

(1 to 31), daily timer recording date (Su–Sa, Mo–Sa or

Mo–Fr) or weekly timer recording date (Su to Sa).

– Programming a timer recording (setting the date) is

possible up to one month ahead of the TV programme’s

broadcasting date and time. Daily and weekly timer

recordings will continue until you cancel them.

Auto SP/LP Change Function

If the VCR determines that the remaining tape time is

insufficient to record the whole programme, LP mode is

automatically selected to ensure that the programme will be

recorded as long as possible.

Press the [SP/LP/EP] button to select [A].

– This function cannot change the recording speed to the EP

mode.

– If the remaining tape time is still not sufficient even in the

LP mode, the programme cannot be recorded to its end.

– If the recording speed changes from SP to LP during a

timer recording, some brief picture distortion occurs at that

point.

VPS/PDC Function

If a TV programme, for example a football game runs longer

than scheduled, is shortened or starts earlier or later, this

function synchronises the recording start and stop with the

actual broadcasting start and stop of the TV programme.

Press the [Cursor] buttons 3421 to make the [ON]

indication appear.

– [ON] must be displayed under [VPS/PDC] on the TV

screen.

– The TV station must broadcast VPS/PDC signals.

– The programme starting time must be set correctly to the

starting time listed in the newspaper/magazine.

To Check, Change or Cancel Timer

Recording Programmings

Press the [PROG./CHECK] button to display the timer

recording programmings on the TV screen.

– When the VCR is in the timer recording standby mode

for a VPS/PDC recording, the On Screen Display may

be distorted.

Press the [Cursor] buttons 34 to select the

programming that you want to change or cancel.

To change or cancel timer recording programmings, use

the [Cursor] buttons 3421, the [Channel], [DATE],

[ON], [OFF] or [CANCEL] button.

Press the [OK] button to conclude the setting.

Press the [EXIT] button to exit the On Screen Display.

Note:

In some cases, for example as listed below, the programming

of a timer recording remains stored in the memory until 4 a.m.

the next day. However, this is not a malfunction.

– When a timer recording was not performed up to the TV

programme’s ending time because the remaining tape time

was not sufficient.

– When you have stopped the timer recording while it was

being performed.

To Check the Total Timer Recording

Programming Time

The total time indication for timer

recording programming lets you check

how many programmes can be

recorded by comparing with the

remaining tape time in the VCR

display.

– The total time is calculated in the SP mode.

– The total time cannot be calculated when setting Daily/

Weekly timer recording.

EXIT

PROG. / CHECK

ZDF 27/10 20:00 21:30 SP ON

2. jjjjj jj/jj jj:jj jj:jj j jjj

jjjjj jj/jj jj:jj jj:jj j jjj

Total (SP) 90min

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NV-HS820EE Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info