Bedienungsanleitung Panasonic NV-HS820EE (Seite 16 von 26) (Englisch)

53884

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

– Connect a digital still camera, a video movie camera or

another external source to the Video Input socket/S-Video

Input socket and Audio Input sockets on the front panel of

this VCR.

Press the [STILL ALBUM]

button on the remote control to

put the VCR in the recording

pause mode.

– The VCR automatically selects the AV Input (external

input) [A3] and then switches over to the recording

pause mode. The figure for the preset recording time

(seconds) appears on the VCR display. The initial

setting is [05] (5 seconds).

Press the [INDEX] L or [INDEX] K button to

change the recording time. You can set any time

between [3] and [20] seconds.

Start playback on the source unit to search for the point

from which you want to copy onto this VCR.

When that point is reached,

press the [STILL ALBUM] button

on the remote control again to

start recording.

The VCR records the picture (and sound) for 5 seconds

and then automatically switches over to the recording

pause mode.

When you have recorded all desired scenes, press the

[Stop] button to finish recording.

Hints:

– If you connect a digital still camera, use a camera equipped

with the video output socket. Use the cable supplied with

the still camera to connect it. For details, also read the

operating instructions of the equipment to be connected.

– If you leave the VCR in the recording pause mode for more

than 5 minutes, the VCR automatically switches over to the

stop mode to protect the video heads. In this case, press

the [STILL ALBUM] button again to put the VCR in the

recording pause mode again.

– Depending on the output system of the digital still camera,

the pictures may not be recorded correctly.

– If you dub still pictures from a conventional analogue video

movie camera or VCR, some picture distortion may occur in

the recorded picture.

INDEX

REC

INDEX

STILL ALBUM

Search Functions

Programme List Search

– Each timer recording programming on the tape must be at

least 15 minutes long. (25 minutes in the EP mode)

Press the [SEARCH] button to

display the Programme List

menu.

Press the [Cursor] buttons 34 to select the

programme that you want to locate and play back.

Press the [SEARCH] button to start the search for the

beginning of the selected programme.

– After the desired recorded programme has been

found, playback starts automatically.

– If, after playback has started, you want to search for

the beginning of the same or another programme,

press the [SEARCH] button. Playback stops, and the

Programme List menu appears.

To Cancel the Programme List Search

Press the [EXIT] button.

Notes:

– If you take out the cassette after a timer recording has

finished, pressing the [SEARCH] button activates the Intro-

Jet Scan.

– If you programme linked timer recordings, Programme List

Search function does not work.

VISS=VHS Index Search System

– Each programme recorded on the tape must be at least

5 minutes long.

Press the [INDEX] button to start the index search. If

you want to search for the 2nd recorded programme in

forward direction, press the [INDEX] ; button twice.

– The VCR fast-forwards or rewinds the tape and

searches for the specified index signal. When it has

been found, playback starts automatically.

To Cancel the Index Search or to Stop Playback

Press the [Stop] button.

Intro-Jet Scan

– Each programme recorded on the tape must be at least

15 minutes long. (25 minutes in the EP mode)

Press the [SEARCH] button to start the Intro-Jet Scan.

– After rewinding the tape to the beginning, the VCR

plays it back at high speed for approximately

10 seconds. It then fast-forwards the tape to the next

tape position marked by an index signal (beginning of

a programme), and every time an index signal is

found, the VCR switches over to high-speed playback

(Cue) for about 10 seconds.

When you have found the programme that you want to

view, press the [Play] button to start normal playback.

To Cancel the Intro-Jet Scan or to Stop Playback

Press the [Stop] button.

Note:

– If you press the [SEARCH] button after a timer recording

has finished, but before ejecting that cassette, the

Programme List Search will be activated.

Editing

Album Function

The album function lets you collect desired scenes (both

moving and still pictures) and create the equivalent of a photo

album, but on video cassette.

Digital still camera Video movie camera

Programme List

Pos

Name Date Start

1 ZDF 27/10 17:46

2 ARD 28/10 15:00

Panasonic VCR

EXIT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NV-HS820EE Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info