Bedienungsanleitung Panasonic NV-HS820EG (Seite 20 von 26) (Englisch)

53886

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

– If [Clock setting] is set to [AUTO] and [Power save] to [ON],

the Automatic time correction function does not work while

the VCR is turned off. However, as soon as it is turned on,

the Automatic time correction function is activated and the

clock is set correctly.

Various Settings

Press the [MENU] button to display the Main menu

on the TV screen.

Press the [Cursor] buttons 34

to select [Other settings].

Press the [OK] button to display

Other settings menu.

Press the [Cursor] buttons 3421 to select the

desired field then desired position.

Tape length: To set the Tape length of the

cassette being used to ensure

correct indication of the remaining

tape time.

– Set Tape length as follows:

[AUTO (2 E-240)]: The VCR automatically

distinguishes E30, E60, E90,

E120, E180, E240, EC10,

EC15 and EC30 tapes.

[E-195]: For E195 and EC30 tape

[E-260]: For E260 and EC45 tape

[E-300]: For E300 and EC60 tape

– Even if you have selected the correct tape length, the

remaining tape time may not be indicated correctly

with certain kinds of cassettes.

OSD: For automatic display on the TV

screen of the TV station information,

type of sound system of the

programme being watched and the

sound playback mode. (See page

22.)

– Set OSD mode as follows:

[4:3]: Indications can be displayed on the

TV screen.

[16:9]: Indications can be displayed on the

TV screen when using wide type of

TV screen and selecting the wide

screen mode on the TV setting.

– Even if setting to [16:9], indications may be cut off

depending on the TV.

[OFF]: No indications appears.

Clock setting

Time

Date

Panasonic VCR

Clock setting

: AUTO

: 20:30:24

: 16.10.05

Clock setting

Time

Date

Panasonic VCR

Clock setting

: MAN.

: 20:30:24

: 16.10.05

Tape length

OSD

Power save

VCR display

AV2

TV system

Language

Country

: AUTO (2 E-240)

: 4:3

: OFF

: DIMMED

: DECODER

: AUTO

: English

: others

Other settings

Panasonic VCR

EXIT

Setting the VCR’s Clock

To Manually Adjust the Clock

Press the [MENU] button to display the Main menu on

the TV screen.

Press the [Cursor] buttons 34

to select [Clock setting].

Press the [OK] button to display

the Clock setting menu on the

TV screen.

Confirm that [Clock setting] is set to [MAN.], and then

press the [OK] button.

Use the [Cursor] buttons 3421 to set the date and

time.

– Instead of the [Cursor] buttons 3421, you can also

use the [Numeric] buttons to set the date and time.

Press the [OK] button to conclude the setting.

Press the [EXIT] button to exit the On Screen Display.

To Activate the Automatic Time Correction

Function

If a TV station transmits a signal for time setting, performing

the operation steps below activates the Automatic time

correction function and the time is corrected automatically.

Press the [MENU] button to display the Main menu on

the TV screen.

Press the [Cursor] buttons 34

to select [Clock setting].

Press the [OK] button to display

the Clock setting menu on the

TV screen.

Press the [Cursor] buttons 34 to set [Clock setting] to

[AUTO].

Press the [OK] button to conclude the setting.

– Under adverse reception conditions, etc., the

Automatic time correction function may not work. In

this case, the indication for [Clock setting] is

automatically reset to [MAN.].

If the reception conditions improve later on, it may be

possible to activate this function.

Press the [EXIT] button to exit the On Screen Display.

Hints:

– If [Clock setting] is set to [AUTO] when you open the Clock

screen, do not set it to [MAN.], otherwise, the automatic

time correcting function is deactivated.

– The built-in clock employs the 24-hour system.

– In case of a power failure, an automatic back-up system

automatically maintains the operation of the clock for

approximate 60 minutes.

– When [Clock setting] is set to [AUTO], the automatic time

correction function checks and if necessary adjusts the time

several times every day.

The automatic time correction function only works when the

VCR is switched off; it does not work in the timer recording

standby mode.

– If [Clock setting] is set to [MAN.] and [Power save] to [ON]

(see page 21), the time may not be maintained correctly. In

this case, manually adjust the clock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NV-HS820EG Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info