Bedienungsanleitung Panasonic NV-HS820EG (Seite 21 von 26) (Englisch)

53886

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

EXIT

Power save: To reduce the VCR’s power

consumption when the VCR is

switched off.

– Set Power save mode as follows:

[ON]: The power consumption is greatly

reduced when the VCR is turned off.

[OFF]: The power consumption is not

reduced when the VCR is turned off.

Refer to the followings when [Power save] is set to

[ON].

– [VCR display] is automatically set to [OFF].

– To turn the VCR on, keep the [VCR-ON/OFF] button

pressed on the VCR main unit. It is not possible to

turn it on with the remote control.

– The Power save function does not work in the timer

recording standby mode. After all programmed timer

recordings have been made, and after all

programmed data have been erased, the VCR

switches over to the Power save mode.

– When the VCR is off, Pay TV programmes cannot be

watched on the TV because the signal from the

connected decoder is not looped through. To watch

them, turn on the VCR.

VCR display: For automatic change of the

brightness of the VCR display when

the VCR is switched off.

– Set the brightness of the VCR display as follows:

[ON]: Indications are brightly lit.

[OFF]: Indications are not lit.

[DIMMED]: Indications are dimly lit.

AV2: To select the type of external

source equipment which is

connected to the VCR’s AV2 21-pin

socket.

– Set the external source equipment as follows:

[DECODER]: When a decoder is connected.

[EXT LINK 1]: When a digital receiver which

transmits a special control signal

recordings via the 21-pin Scart

cable, for example the F.U.N.

receiver (TU-DSF30/S3) is

connected for the linked timer

recordings. (See page 13.)

[EXT LINK 2]: When an external equipment with a

timer function is connected for the

linked timer recordings. (See page

13.)

[EXT]: When another VCR or a satellite

receiver is connected.

TV system: To select the type of colour TV

system to be used during playback

or during recording from an external

source.

– Set the colour TV system as follows:

[AUTO]: The VCR automatically

distinguishes PAL, SECAM/

MESECAM system. If the picture

lacks colour, set to [PAL] or

[MESECAM].

[PAL]: When PAL system is used.

[MESECAM]: When SECAM system is used.

Press the [OK] button to conclude the setting.

Press the [EXIT] button to exit the On Screen Display.

Language or Country Setting

Press the [MENU] button to display the Main menu

on the TV screen.

Press the [Cursor] buttons 34

to select [Other settings].

Press the [OK] button to display

Other settings menu.

Press the [Cursor] buttons 3421 to select

[Language] or [Country] and the entry field for

[Language] or [Country] in this order.

Press the [Cursor] buttons 34 to select the desired

language or country.

Press the [OK] button to conclude the setting.

Press the [EXIT] button to exit the On Screen Display.

Tape length

OSD

Power save

VCR display

AV2

TV system

Language

Country

: AUTO (2 E-240)

: 4:3

: OFF

: DIMMED

: DECODER

: AUTO

: English

: others

Other settings

Panasonic VCR

EXIT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NV-HS820EG Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info