Bedienungsanleitung Panasonic NVGS33EB (Seite 42 von 52) (Englisch)

627433

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Others

-42-

≥If the Battery is left on the Movie Camera for a

long time, the voltage drops excessively, and

the Battery will not function even after it is

recharged.

ª About AC Adaptor

≥If the temperature of the Battery is extremely

high or extremely low, the [CHARGE] Lamp

may continue flashing, and the Battery may not

be charged. After the temperature of the Battery

has decreased or increased sufficiently,

charging starts automatically. If the [CHARGE]

Lamp continues to flash even after the Battery

temperature has decreased or increased

sufficiently, the Battery or AC Adaptor may be

faulty. In this case, please contact a dealer.

≥If the Battery is warm, charging takes a longer

time than normal.

≥If you use the AC Adaptor near a radio, radio

reception may be disturbed. Keep the AC

Adaptor 1 metre or more away from radio.

≥When using the AC Adaptor, it may generate

whirring sounds. However, this is normal.

≥After use, be sure to pull out the AC Mains Lead

from the AC mains socket. (If they are left

connected, a minute amount of current is

consumed.)

≥Keep the electrodes of the AC Adaptor and

Battery always clean.

ª Condensation

If you turn the Movie Camera on when

condensation occurs on the head or the tape,

Condensation Indication [3DEW] (yellow or red)

blinks on the Viewfinder or the LCD monitor and

the messages [DEW DETECT] or [EJECT TAPE]

(only when the tape is inserted) appear. In this

case, follow the procedure below.

Blink in yellow:

Dews are slightly adhering on the head or the

tape.

Blink in red:

Dews are adhere on the head or the tape.

1 Remove the tape if it is inserted.

≥It takes about 20 seconds to open the

Cassette Holder. This is not a malfunction.

2 Leave the Movie Camera with the Cassette

Compartment Cover closed to cool or warm

it to the ambient temperature.

When [3DEW] blinks in yellow

≥Leave the Movie Camera for about 30

minutes.

When [3DEW] blinks in red

≥The Power Indicator Lamp blinks for about 1

minute and then the Movie Camera

automatically turns off. Leave it for about 2

to 3 hours.

3 Turn the Movie Camera on again, set it to

the Tape Recording/Playback Mode and

then check if the condensation indication

disappears.

Especially in cold districts, dews may be frozen.

In this case, it may take more time before the

condensation indication disappears.

Watch for Condensation even before the

Condensation Indication is displayed.

≥The condensation indication may not appear

depending on circumstances. When

condensation occurs on the lens or the Movie

Camera, it also may occur on the head and the

tape. Do not open the Cassette Compartment

Cover.

When the Lens is Fogged:

Set the [OFF/ON] Switch to [OFF] and leave the

Movie Camera in this condition for about 1 hour.

When the lens temperature becomes close to the

ambient temperature, the fogging disappears

naturally.

ª Video Head Clogging and Care

If the heads (the parts that make contact with the

tape) are dirty, mosaic-pattern noise may appear

on the playback image, or the screen as a whole

becomes black. If the heads are extremely dirty,

recording performance deteriorates, and, in the

worst case, the Movie Camera cannot record at

all.

Causes of Dirty Heads

≥Large quantity of dust in the air

≥High-temperature and high-humidity

environment

≥Damaged tape

≥Long operating hours

Using Mini-DV Format Digital Video Head

Cleaner

1 Insert the Head Cleaner into the Movie

Camera in the same manner as a Video

Cassette.

2 Press the [1] Button, and approximately

20 seconds later, press the [∫] Button. (Do

not rewind the tape.)

3 Take out the Head Cleaner. Insert a Video

Cassette and start recording. Then, play the

tape back to check the recorded image.

4 If the image is not still clear, repeat

Steps 1 to 3. (Do not use the Head Cleaner

for 3 times or more consecutively.)

Notes:

≥Do not rewind every time you use the Head

Cleaner. Rewind only when the tape reaches

the end, and then use it again from the

beginning in the same manner as before.

≥If the heads become dirty soon after cleaning,

the tape may be damaged. In this case,

immediately stop using that Cassette.

≥Do not clean the heads excessively. (Excessive

cleaning may cause excessive wear of the

33B-ENG.book 42 ページ２００４年２月４日　水曜日　午前１１時５５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVGS33EB Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info