Bedienungsanleitung Panasonic NVGS33EB (Seite 44 von 52) (Englisch)

627433

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Others

-44-

ª LCD Monitor/Viewfinder/Lens Hood

LCD Monitor

≥In a place with drastic temperature changes,

condensation may form on the LCD Monitor.

Wipe it with soft dry cloth.

≥If your Movie Camera is extremely cold when

you turn its power on, the image on the LCD

Monitor is slightly darker than usual at first.

However, as the internal temperature increases,

it goes back to the normal brightness.

Viewfinder

≥Do not direct the Viewfinder or Lens to the sun.

Internal components may be seriously

damaged.

≥When the Movie Camera is used with a large

capacity Battery (CGA-DU14, CGA-DU21;

optional) attached to it, it is not practical to look

in the Viewfinder from behind the Battery.

Lens Hood

≥Do not attach other conversion lenses in front of

the Lens Hood; there is no mount to be used for

the attachment.

≥When you wish to attach the Tele Conversion

Lens (VW-LT2714N2E; optional), Wide

Conversion Lens (VW-LW2707N2E; optional),

MC Protector (VW-LMC27E; optional), or ND

Filter (VW-LND27E; optional), first of all, turn

the Lens Hood counterclockwise. If the MC

Protector or ND Filter is used, the Lens Hood

can be mounted on the filter.

≥If you push the [W/T] Lever toward [W] during

recording with the filter and conversion lens

attached together to the Movie Camera,

4 corners of the image may become dark

(vignetting). For details, please refer to the

operating instructions of your accessories.

Extremely high precision technology is

employed to produce the LCD Monitor

screen featuring a total of approximately

123,000 pixels. The result is more than

99.99% effective pixels with a mere 0.01% of

the pixels inactive or always lit. However,

this is not a malfunction and does not affect

the recorded picture.

Extremely high precision technology is

employed to produce the Viewfinder screen

featuring a total of approximately 67,500

pixels. The result is more than 99.99%

effective pixels with a mere 0.01% of the

pixels inactive or always lit. However, this is

not a malfunction and does not affect the

recorded picture.

≥Be sure to keep the Lens Hood attached to the

Movie Camera so as to shut out unnecessary

light.

Before Requesting Repair (Problems

and Solutions)

Power

1: The Movie Camera power cannot be turned

on.

• Is the power source connected correctly? (

-9-)

2: The Movie Camera power is turned off

automatically.

• When the Recording Pause Mode continues

for more than 6 minutes, the power is turned off

automatically for tape protection and power

conservation. (If the AC Adaptor is used, the

power is turned off only when the tape is

inserted in Tape Recording Mode.) When the

tape is inserted in Tape Recording Mode and if

the Recording Pause Mode continues for more

than 6 minutes, the power is turned off

automatically.

To resume recording from this condition, turn

off, then turn on the power again.

3: The Movie Camera power does not stay on

long enough.

• Is the Battery low? Charge the Battery or

attach a fully charged Battery. (

-9-)

• Has condensation occurred? Wait until the

Condensation Indication disappears. (

-42-)

Battery

1: Battery runs down quickly.

• Is the Battery fully charged? Charge it with the

AC Adaptor. (

-9-)

• Are you using the Battery in an extremely cold

place? In cold places, the operating time of the

Battery becomes shorter. (

-43-)

• Has the Battery worn out? If the operating time

is still too short even after the Battery is fully

charged, the Battery has worn out.

2: The Battery cannot be charged.

• If the DC Input Lead is connected to the AC

Adaptor, charging cannot be performed.

Disconnect the DC Input Lead.

Normal Recording

1: Recording does not start although power is

supplied to the Movie Camera and the

Cassette is correctly inserted.

• Is the accidental erasure prevention slider on

the Cassette open? If it is open (set to [SAVE]),

recording cannot be performed. (

-12-)

• Is the tape wound to the end? Insert a new

Cassette. (

-12-)

• Is the Movie Camera power turned on? (

-17-)

• Has condensation occurred? Wait until the

Condensation Indication disappears. (

-42-)

33B-ENG.book 44 ページ２００４年２月４日　水曜日　午前１１時５５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVGS33EB Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info