Bedienungsanleitung Panasonic NVGS400EB (Seite 14 von 76) (Englisch)

627443

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Before Use

: Tape Recording Mode

Use this mode when recording pictures on a tape.

Also, you can record still pictures on the card

simultaneously during recording on a tape.

: Tape Playback Mode

Use this mode when playing back the recorded

scene on a tape.

: Card Recording Mode

Use this mode when recording still picture on a

card.

: Picture Playback Mode

Use this mode when playing back the recorded

still picture on a card.

: PC Mode

Use this mode when you want to connect the

Movie Camera to your Personal Computer.

Using the Viewfinder/LCD Monitor

ª Using the Viewfinder

Before using the Viewfinder, adjust the field of

view so that the displays inside the Viewfinder

become clear and easy to read.

1 Tilt up the Viewfinder.

≥The Viewfinder can also be pulled out for use,

and the length of the pulling out is adjusted in

2 steps.

≥Do not pull on the Eyecup to extend the

Viewfinder.

2 Adjust by sliding the Eyepiece Corrector

Knob

(53).

To Use the Viewfinder at the Same Time as the

LCD Monitor

Set [LCD/EVF] >> [EVF ON/AUTO] >> [ON].

≥The Viewfinder does not turn off even if the LCD

Monitor is opened.

≥When you turn the Movie Camera off, this

setting is cancelled.

12:30:45

15.10.2004

12:30:45

15.10.2004

12:30:45

15.10.2004

12:30:45

15.10.2004

(53)

ª Using the LCD Monitor

With the LCD Monitor open, you can also record

the picture while watching it.

1 Press the [PUSH OPEN] Button (2) and pull

the LCD Monitor

(3) out in the direction of

the arrow.

≥The Viewfinder is deactivated.

≥The LCD Monitor can be opened a maximum

of 120o. If you open the LCD monitor by 120o,

it becomes convenient to operate menus or to

play back pictures.

2 Adjust the LCD Monitor angle according to

the desired recording angle.

≥The LCD Monitor can rotate a maximum of

180o 1 from the vertical position upwards

and a maximum of 90o 2 to the downward

direction. Forcefully rotating the LCD Monitor

beyond these ranges will damage the Movie

Camera. You cannot rotate the LCD Monitor

when it is opened 120o angle. Therefore, do

not rotate it forcibly.

Closing the LCD Monitor

Push the LCD Monitor until it is securely locked.

≥Make sure the Card Slot Cover is closed.

ª Adjusting Brightness and Colour

Level

When [LCD/EVF SET] on the [LCD/EVF]

Sub-Menu is set to [YES], the following items are

displayed.

LCD Brightness [LCD BRIGHTNESS]

Adjusts the brightness of the image on the LCD

screen.

LCD Colour Level [LCD COLOUR LEVEL]

Adjusts the colour saturation of the image on the

LCD screen.

PUSH

OPEN

(2) (3)

290o1180o

1LCD BRIGHTNESS

[-]||||----[+]

LCD COLOUR LEVEL

[-]||||----[+]

EVF BRIGHTNESS

[-]||||----[+]

;/∫:SELECT &/%:SETUP

!/MENU:EXIT

LCD/EVF SETUP

400EB.book 14 ページ２００４年６月３日　木曜日　午後２時７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVGS400EB Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic NVGS400EB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info