Bedienungsanleitung Panasonic NVGS400EB (Seite 15 von 76) (Englisch)

627443

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Before Use

Brightness of the Viewfinder

[EVF BRIGHTNESS]

Adjusts the brightness of the image in the

Viewfinder.

To Adjust

Press the [;/∫] Button and select the item to be

adjusted, and then press the [6/5] Button to

raise or lower the number of vertical bars in the

Bar Indication.

≥A larger number of vertical bars indicates

stronger brightness or colour saturation.

To Increase the Brightness of the Entire LCD

Monitor

Press the [POWER LCD] Button.

When you press the [POWER LCD] Button, the

LCD monitor becomes bright about twice as

much as usual.

The Power LCD Lamp

(30) lights up.

≥When turning the power on with using AC

Adaptor, [POWER LCD] function is

automatically effective.

≥When you rotate the LCD Monitor 180o and then

close it, it resumes normal brightness.

To Resume Normal Brightness

Press the [POWER LCD] Button again.

To Change the Picture Quality of the LCD

Monitor

Set the [LCD AI] on the [LCD/EVF] Sub-Menu to

[ON] or [OFF].

[ON]: The screen image becomes clear and

vivid. (The effect varies according to the

recording scene.)

≥When Power LCD Lamp lights up, [LCD AI] is

automatically set to [ON]. You cannot change

this setting.

≥These adjustments do not affect the recorded

images.

≥For other notes concerning this item, see

-68-.

POWER

LCD

(30)

Using the Menu Screen

To facilitate the selection of a desired function or

setup, this Movie Camera displays various

function setups on Menus.

≥When operating the menu with the Viewfinder,

set [LCD/EVF] >> [EVF ON/AUTO] >> [ON] or

rotate the LCD monitor by 180o.

1 Press the [MENU] Button (16).

≥The Menu corresponding to the Mode

selected by using the Mode Dial

(44) is

displayed.

2 Press the [;/∫] Button to select a desired

Sub-Menu.

≥Press the [;/∫] Button to display the

highlighted item.

3 Press the [5] Button to display the

selected Sub-Menu.

4 Press the [;/∫] Button to select the item.

5 Press the [5] Button to display the

selected item.

6 Press the [;/∫] Button to select the desired

mode and press [ENTER] Button to

determine the setting.

≥While a Menu is displayed, you cannot record or

play back. Menus can be displayed during

playback but not during recording. The above

operations can be done using the [MENU]

Button, [π, ∑, ∏, ∫] Buttons and [ENTER]

Button on the Remote Controller. (

-8-)

To Return the Previous Screen

Press the [6] Button.

To Exit the Menu Screen

Press the [MENU] Button again.

About the Menu Mode Setting

The setting selected on the Menu will be retained

even when the Movie Camera is turned off.

However, if the Battery or AC Adaptor is

disconnected before turning off the Movie

Camera, the selected setup may not be retained.

(The setups of [EFFECT2] (

-35-) are not retained.)

≥Menu operation flow is shown in this text by >>.

STILL

FADE

ENTER

(16)

(44)

400EB.book 15 ページ２００４年６月３日　木曜日　午後２時７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVGS400EB Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic NVGS400EB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info