627468
10
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
Before
Use
-44-
ª
Accidental Erasure Prevention
Opening the accidental erasure prevention
slider 1 on the cassette (by sliding it in the
[SAVE] arrow direction) prevents recording. To
enable recording, close the accidental erasure
prevention slider (by sliding it in the [REC] arrow
direction).
For other notes concerning this item, see
-64-
.
Turning on the Movie Camera and
Selecting Modes
Turn on the power first and then select modes.
ª
How to Turn on the Power
1
Set the [OFF/ON] Switch
(50)
to [ON].
The [CAMERA] Lamp
(48)
lights up.
ª
How to Switch Modes
2
Press the [MODE] Button
(47)
.
With each press, the Mode changes.
The appropriate Mode Lamp lights up.
ª
How to Turn off the Power
3
Set the [OFF/ON] Switch
(50)
to [OFF].
Using the Viewfinder/LCD Monitor
ª
Using the Viewfinder
Before using the Viewfinder, adjust the field of
view so that the displays inside the Viewfinder
become clear and easy to read.
1
Pull out the Viewfinder and tilt it up.
The angular part of the Viewfinder can be
turned upward by 80x and downward by 38x.
Do not pull on the Eyecup to extend the
Viewfinder.
R E C
SAVE
1
OFF ON
CAMERA
VCR
(48)
(50)
MODE
(47)
OFF ON
(50)
2
Adjust by sliding the Eyepiece Corrector
Knob
(25)
.
ª
Using the LCD Monitor
With the LCD Monitor open, you can also record
the picture while watching it.
1
Press the [PUSH OPEN] Button
(10)
and, at
the same time, bring the LCD Monitor
(11)
out about 90o in the direction of the arrow.
The Viewfinder goes off.
2
Adjust the LCD Monitor angle according to
the desired recording angle.
The LCD Monitor can rotate a maximum of
180o 1 from the vertical position to the
upward direction and a maximum of 90o 2
to the downward direction. Forcefully
rotating the LCD Monitor beyond these
ranges will damage the Movie Camera.
When you open the LCD Monitor, be sure
that the LCD Monitor and the Viewfinder
cannot touch.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
ª
Adjusting Brightness and Colour
Level
When [LCD/EVF SET] on the
[DISPLAY SETUP] Sub-Menu is set to [YES],
the following items are displayed.
LCD Brightness [LCD BRIGHTNESS]
It adjusts the brightness of the image on the
LCD screen.
LCD Colour Level [LCD COLOUR LEVEL]
It adjusts the colour saturation of the image on
the LCD screen.
12:30:45
15.10.2002
12:30:45
15.10.2002
12:30:45
15.10.2002
12:30:45
15.10.2002
(25)
(11)
(10)
290o
1180o
LCD/EVF SET
PRESS MENU TO RETURN
LCD BRIGHTNESS
[-]||||----[+]
LCD COLOUR LEVEL
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic NVMD9000EN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info