543734
66
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
[Setting] menu
66 - ENGLISH
Settings
[Logo]
Sets logo selection and the PIN code for logo
selection.
1) Press
▲▼
to select [Logo].
2) Press the <SELECT> button.
z
The sub menu 2 is displayed.
3) Press
▲▼
to switch the setting.
[Logo select]
1) Select [Logo select], and press the
<SELECT> button.
2) Press
▲▼
to switch the setting.
z
The setting will change as follows each time
you press the button.
[Off] [User]
*1
[Default]
[Off] Clears logo from screen.
[User]
*1
Displays the image registered by the
user.
[Default]
Displays in the factory default
settings.
*1: Available when the image is registered.
z
“Logo Transfer Software” is required to register
the image.
[Logo PIN code lock]
Sets the system to make the setting and changing
of the “logo” only by the administrator.
1) Select [Logo PIN code lock], and press
the <SELECT> button.
z
The PIN code input screen is displayed.
2) Press
▲▼◀▶
or the number (<0> -
<9>) buttons to enter your pin code.
3) Press
▲▼◀▶
to select [Set].
4) Press the <SELECT> button.
z
If the PIN code is accepted, the projector
returns to the sub menu 2.
5) Press
▲▼
to switch the setting.
[Off] [On]
[Off]
The logo selection can be changed
without the PIN code.
[On]
The PIN code is required to change
the logo selection.
Note
z
The entered PIN code is displayed with * mark on
the screen.
z
The factory default setting for the logo PIN code is
“4321”.
z
To re-enter a number, press
◀▶
to select the digit
to re-enter, then use the
▲▼
or number (<0> -
<9>) buttons to re-select the number.
z
Move the cursor to [Cancel] and press the
<SELECT> button to return to the sub menu 2.
z
If [Logo PIN code] and the number are displayed in
red, an error has occurred. Re-enter the number.
[Logo PIN code change]
Changes the logo PIN code.
1) Select [Logo PIN code change], and
press the <SELECT> button.
z
The PIN code input screen is displayed.
2) Press
▲▼◀▶
or the number (<0> -
<9>) buttons to enter your pin code.
3) Press
▲▼◀▶
to select [Set].
4) Press the <SELECT> button.
z
If the PIN code is accepted, the new logo PIN
code is displayed on the screen.
5) Press
▲▼◀▶
or the number (<0> -
<9>) buttons to set your new PIN code.
6) Press the <SELECT> button.
7) Select [Yes], and press the <SELECT>
button.
z
If the PIN code is accepted, the projector
returns to the sub menu 2.
Note
z
To re-enter a number, press
◀▶
to select the digit
to re-enter, then press
▲▼
or the number (<0> -
<9>) buttons to re-select the number.
z
Move the cursor to [Cancel] and press the
<SELECT> button to return to the sub menu 2.
66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic PT-EX16KU wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic PT-EX16KU

Panasonic PT-EX16KU Bedienungsanleitung - Deutsch - 106 seiten

Panasonic PT-EX16KU Installationsanweisung - Englisch - 27 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info