543734
68
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
[Setting] menu
68 - ENGLISH
Settings
[Power management]
1) Press
▲▼
to select [Power
management].
2) Press the <SELECT> button.
z
The sub menu 2 is displayed.
3) Press
▲▼
to switch the setting.
[Off]
Cancels power management
function.
[Ready]
Turns off the lamps and starts
cooling when the time set using
[Timer] has elapsed. While lamp is
being cooled, the standby indicator
<STAND-BY>, and the power
indicator <POWER> are ashing,
you cannot operate the projector.
When lamp cooling has nished,
the power indicator <POWER>
continues ashing and the standby
indicator <STAND-BY> lights up
instead of ashing, indicating that
the projector is now in the power
management mode.
From this point, if a signal is input
or operations are performed on the
projector, the lamps will turn on and
the projection will start.
[Shut down]
Turns off the lamps and starts
cooling when the time set using
[Timer] has elapsed. During lamp
cooling, you cannot operate the
projector.
When lamp cooling has nished,
the power will turn off.
[Timer] Sets times from 1 - 30 minutes.
Note
z
The factory default setting is [Off].
z
The power management function cannot be used
when the freeze function (
page 37) or shutter
function (
page 37) is in use.
z
When the power management function is started,
[P-timer] is reset.
[Direct on]
This is a function for automatically switching on
the power of the projector when the power cord is
connected, without requiring operations on the power
<ON> button on the remote control or the power <ON/
STAND-BY> button on the control panel.
1) Press
▲▼
to select [Direct on].
2) Press the <SELECT> button.
z
▲▼
are displayed over the sub menu 2.
3) Press
▲▼
to switch the setting.
[Off] [On]
[Off]
Enables normal operations to turn
on/off the power.
[On]
Allows power to be turned on
directly.
Note
z
Be sure to turn on/off the power using the correct
operations.
z
Pressing the power <ON> button on the remote
control or the power <ON/STAND-BY> button on
the projector will not turn on the power until the
lamp cooling has nished and the lamps are ready
to be turned on again.
68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic PT-EX16KU wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic PT-EX16KU

Panasonic PT-EX16KU Bedienungsanleitung - Deutsch - 106 seiten

Panasonic PT-EX16KU Installationsanweisung - Englisch - 27 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info