Bedienungsanleitung Panasonic PT-EX16KU (Seite 71 von 108) (Englisch)

543734

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

[Setting] menu

ENGLISH - 71

Settings

■■

[Effect]

Sets special effects when shutter is opened and

closed.

1) Select [Effect], and press the

<SELECT> button.

■

▲▼

are displayed over the sub menu 2.

2) Press

▲▼

to select an item.

[Off] [L 1] [L 2]

[Off]

Turns off special effect.

Factory default setting

[L 1]

Sets fade in and fade out when the

shutter is opened and closed.

[L 2]

Sets slower fade in and fade out

than L1.

■■

[Release key]

Sets the release button when shutter is closed.

1) Select [Release key], and press the

<SELECT> button.

■

▲▼

are displayed over the sub menu 2.

2) Press

▲▼

to select an item.

[Any] [SHUTTER]

[Any]

The shutter function is canceled

by pressing any button except the

<MUTE> button on the remote

control, and the function of the

pressed button is executed.

[SHUTTER]

Only the <SHUTTER> button on the

remote control or the control panel

can be canceled.

Note

If the power is turned on again after the power is

turned off during the setting or the lamp is turned off

with the [Management] setting, the shutter function

is canceled.

The setting of the selected item is enabled.

■■

[Management]

Sets a time between closing of the shutter and the

lamps turning off.

1) Select [Management], and press the

<SELECT> button.

■

▲▼

are displayed over the sub menu 2.

2) Press

▲▼

to select an item.

■

You can set times from 5 - 480 minutes.

Note

When the management function is active, the lamp

is turned off and the projector will begin a cooling

operation.

When cooling has nished, the power of the

projector body is turned off and the standby

indicator <STAND-BY> turns on.

The shutter indicator <SHUTTER> begins ashing

in blue as the cooling operation begins.

The ashing continues after the cooling has

nished and the standby indicator <STAND-BY>

has turned on.

The ashing stops when the projector power is

turned on again.

The power management function does not work

when the image is blocked by the [Shutter].

The factory default setting is “180 minutes”.

You cannot set the time while the function is off.

[Video delay control]

Sets when you want to speed up digital processing of

the images being projected.

1) Press

▲▼

to select [Video delay

control].

2) Press the <SELECT> button.

3) Press

▲▼

to select an item.

[Off] [Low]

[High] [Mid]

Note

The speed of digital processing increases through

[Low], [Mid], and [High].

When each item is selected, the following items are

grayed out and cannot be selected.

[Low]

[Keystone] of the [Screen] menu

[Mid]

[Progressive] and [Noise

reduction] of the [Image adjust]

[High]

[Keystone] of the [Screen] menu

[Progressive] and [Noise

reduction] of the [Image adjust]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-EX16KU Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-EX16KU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info