Bedienungsanleitung Panasonic RXD45EG (Seite 5 von 20) (Englisch, Spanisch, Polnisch)

608286

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ENGLISHESPAÑOL

RQTX1040

Using the FM/AM radio

Manual tuning Manual tuning

1 Press [FM/AM] to select “FM” or “AM”.

2 If “PGM” is displayed, press [TUNE MODE] to clear it.

3 Press [–/2] or [6/+] to select the frequency of the required station.

To tune automatically

Press and hold [–/2] or [6/+] until the frequency starts changing

rapidly. The unit begins auto tuning, stopping when it ﬁ nds a station.

• Auto tuning may not function when there is excessive interference.

• To cancel auto tuning, press [–/2] or [6/+] once again.

To improve reception

FM: Extend the whip antenna and adjust its direction.

AM: Adjust the position of the unit.

To improve FM sound quality

When “FM” is selected

Press [FM MODE] to display “MONO”.

To cancel

Press [FM MODE] again.

• MONO is also cancelled if the frequency is changed.

• Turn off “MONO” for normal listening.

Memory preset Memory preset

Up to 16 stations each can be set in the FM and AM bands.

✒

Preparation

Press [FM/AM] to select “FM” or “AM”.

Automatic presetting

Press and hold [–AUTO PRESET] to start presetting.

The tuner presets all the stations it can receive into the channels in ascending

order. When ﬁ nished, the last station memorised is tuned in.

Manual presetting

1 If “PGM” is displayed, press [TUNE MODE] to clear it.

2 Press [–/2] or [6/+] to select the frequency of the required station.

3 Press and hold [–PGM].

“PGM” and the selected frequency blinks.

4 Within 10 seconds or so

Press [–PGM] followed by [–/2] or [6/+] to select the desired

channel.

5 Press [–PGM].

The station occupying a channel is erased if another station is preset to that

channel.

6 Repeat steps 2 to 5 to preset more stations.

Selecting a preset station

1 Press [TUNE MODE].

“PGM” is displayed.

2 Press [–/2] or [6/+] to select the

channel.

Preset channel

AM allocation setting AM allocation setting

This system can also receive AM broadcasts allocated in 10 kHz steps.

To change the step from 9 kHz to 10 kHz

1 Press and hold [8] (stop).

After a few seconds the display changes to a ﬂ ashing display of the current

minimum frequency.

2 Continue to hold down [8] (stop).

• When the minimum frequency changes, release the button. To return to the

original step, repeat the above steps.

• After the setting is changed, any previously preset frequency will be

cleared.

Cassette tape – Play and record

Basic play Basic play

Use normal position tapes.

High position and metal position tapes can be played, but the unit will not be

able to identify the characteristics of these tapes.

1 Press [TAPE/OFF].

2 Open the cassette operation buttons’ lid.

3 Press [8/x, STOP/EJECT] and insert the cassette.

Insert with the side to be played facing up and the exposed tape facing

towards you. Close the deck by hand.

4 Press [4, PLAY] to start play.

Stop tape

playback

Press [8/x, STOP/EJECT].

Pause play

Press [9, PAUSE].

Press again to resume play.

Fast-forward

and rewind

Press [3, REW/REV] or [5, FF/CUE] in the stop

mode.

Search for a

speciﬁ c point

Press [3, REW/REV] (to search backward) or

[5, FF/CUE] (to search forward) during playback.

Play is resumed when the button is released.

Recording Recording

Use normal position tapes.

High position and metal position tapes can be used, but the unit will not be able

to record or erase them correctly.

✒

Preparation

Wind up the source tape so recording can begin immediately.

1 Press [0, STOP/EJECT] and insert the cassette to be recorded.

Insert with the side to be recorded facing up and the exposed tape facing

towards you.

2 Select the source to be recorded.

Radio

Tune in the station (Z see left).

Disc

1. Insert the disc you want to record.

Press [4/9, CD] and then [8] (stop).

2. Prepare the desired disc recording mode.

Record programmed tracks

Program the tracks you want (Z page 4).

Record speciﬁ c tracks

Press [·PLAY MODE] to select the desired mode

(Z page 4).

3 Press [

] to start recording.

Stop recording

Press [8/x, STOP/EJECT].

Record on the other

side of the tape

Turn the cassette over and press [

Erase a recorded

sound

1. Press [TAPE/OFF].

2. Insert the recorded cassette.

3. Press [

✒

Note

Changes to volume and sound quality do not affect recording.

Erasure prevention

The illustration shows how to remove the tabs to prevent recording. To record on

the tape again, cover as shown.

Side A

Tab for Side ATab for Side B

To prevent recording

Adhesive tape

To re-record

✒

Note

• Tapes exceeding 100 minutes are thin and can break or get caught in the

mechanism.

• Tape slack can get caught up in the mechanism and should be wound up

before the tape is played.

• Endless tapes can get caught up in the deck’s moving parts if used incorrectly.

RQTX1040-1Z_1gb.indd 5RQTX1040-1Z_1gb.indd 5 3/31/2010 3:35:40 PM3/31/2010 3:35:40 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic RXD45EG Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic RXD45EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info