Bedienungsanleitung Panasonic SAXR55 (Seite 23 von 28) (Englisch)

608302

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

RQT7994

ConnectionsSettingsBasic Operations Before useOperationsReference

Select if noise is excessive during radio reception.

Preparation: Enter the MULTI CONTROL. (ápage 22 “Basic operations with the MULTI CONTROL”)

Preset tuning

Presetting stations

n Auto presetting

Set the channel reception to FM 87.9 MHz or AM

530 kHz.

Preset channels that are automatically assigned by this unit are:

FM: 1 to 30

AM: 21 to 30

Preset the FM stations first. If the AM stations are preset before the

FM stations, they will be erased when the FM stations are preset.

Enter the MULTI CONTROL.

(ápage 22 “Basic operations with the MULTI CONTROL”)

Select “TUNER ” and press [ENTER].

Select “AUTO MEM ” (AUTO MEMORY) and

press [ENTER].

Select “START ” and press [ENTER].

•Select “CANCEL ” to cancel.

START,

CANCEL

• During automatic presetting, the memory indicator ( ) flashes

and the frequency scrolls. The memory indicator and channel

numbers are displayed for a second when a station is preset.

• The last station to be preset is displayed when presetting finishes.

• Frequencies may not preset correctly when broadcast waves are too

strong or too weak. In such cases, carry out presetting manually.

CANCEL

MULTI

CONTROL

n Manual presetting

Tune to the station you want to preset. (ápage 22)

Enter the MULTI CONTROL.

(ápage 22 “Basic operations with the MULTI CONTROL”)

Select “TUNER ” and press [ENTER].

Select “MEMORY ” and press [ENTER].

Select a channel number and press [ENTER].

“STORED ” is displayed.

• To continue presetting, press [TUNE 2 or 1] to tune another

station from step 1.

Press [MULTI CONTROL, CANCEL] 2 times to

select “EXIT ” and press [ENTER].

• Even if the AC power supply cord is disconnected from the household AC

outlet, the stations remain in the memory for approximately two weeks.

• FM stations can also be preset in the MONO mode. (ábelow)

CANCEL

MULTI

CONTROL

Listening to preset stations

n On the remote control

• Select the channel

• Press the numbered buttons to select the channel

To select a two digit number

e.g. 21

: [ ≧ 10, ENTER] → [2] → [1]

n On the main unit

Press.

Select the channel.

After 5 seconds, the display will change from the channel number

to the frequency.

• Hold down the button to change channels faster.

Reducing excessive noise

n During FM stereo reception

You can improve FM reception by switching reception to monaural.

n During AM reception

When there is a lot of noise interference with an AM broadcast, try

switching to this mode.

Select “TUNER ” and press [ENTER].

Select “OPTION ” and press [ENTER].

Select “FM MODE ” and press [ENTER].

Select “B PROOF ” (BEAT PROOF) and press [ENTER].

Select “MONO ” and press [ENTER].

•Select “AUTO ” to cancel.

AUTO,

MONO

Select “MODE A ” or “MODE B ” and press [ENTER].

Press [MULTI CONTROL, CANCEL] 2 times to select

“EXIT ” and press [ENTER].

Press [MULTI CONTROL, CANCEL] 2 times to select

“EXIT ” and press [ENTER].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SAXR55 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SAXR55

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info