Bedienungsanleitung Panasonic SC-BT100 (Seite 39 von 48) (Englisch)

61553

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

RQT9161

Messages

The following messages or service numbers appear on the TV or unit’s display when something unusual is detected during startup and use.

Maintenance

Clean this unit with a soft, dry cloth

≥Never use alcohol, paint thinner or benzine to clean this unit.

≥Before using chemically treated cloth, read the instructions

that came with the cloth carefully.

Observe the following points to ensure continued

listening and viewing pleasure.

Dust and dirt may adhere to the unit’s lens over time, making it

impossible to play discs.

Use the lens cleaner (not included) about once every year,

depending on frequency of use and the operating

environment. Carefully read the lens cleaner’s instructions

before use.

On the TV Page

Authorisation Error ≥You are trying to play the DivX VOD content that was purchased with a different

registration code. You cannot play the content on this unit.

Cannot play. ≥You inserted an incompatible disc. 14, 15

Cannot play on this unit. ≥You tried to play a non-compatible image.

≥Confirm “SD” on the unit’s display is not blinking and re-insert the card.

—

No disc ≥The disc may be upside down. —

This disc is incompatible. ≥You inserted an incompatible disc. 14, 15

Rental Expired. ≥The DivX VOD content has zero remaining plays. You cannot play it. 15

$ This operation is

currently disabled.

≥The operation is prohibited by the unit or disc. —

On the unit’s display

ERROR ≥Incorrect operation performed. Read the instructions and try again. —

F99 ≥The unit fails to operate properly. Press [Í/I] on this unit to switch the unit to

standby for 3 seconds. Now press [Í/I] on this unit again to turn the unit on.

—

HDMI ONLY ≥Some BD-Video discs can only be output with HDMI. —

No PLAY ≥There is a viewing restriction on a BD-Video or DVD-Video. 34

No READ ≥The disc is dirty or badly scratched. The unit cannot play. —

PLEASE WAIT ≥Displayed when the unit is started and turned off. This is not a malfunction.

≥The unit is carrying out its recovery process. You cannot operate the unit while

“PLEASE WAIT” is displayed.

—

SET 

(“ ” stands for a number.)

≥The remote control and this unit are using different codes. Change the code on

the remote control.

Press and hold [OK] and the indicated number

button at the same time for more than 5

seconds.

UNFORMAT ≥You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL

or DVD-RW (DVD-Video format).

—

UNSUPPORT ≥You have inserted a disc the unit cannot play. 14, 15

U59 ≥The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes until

the message disappears.

Select a position with good ventilation when installing the unit. Do not block the

cooling fan on the rear of the unit.

—

“[W2S]” or “[W4S]” is flashing.

(when using the optional

wireless accessory: SH-FX67)

≥There is no link between this unit and the wireless system. Check that the

wireless system is plugged into the household mains socket and is turned on.

≥Ensure that the digital transmitter is fully inserted into the slot of this unit.

≥If the wireless system is not used, disconnect the digital transmitter from this unit.

—

U72

U73

≥The HDMI connection acts unusually.

–The connected equipment is not HDMI compatible.

–Please use HDMI cables that have the HDMI logo (as shown on the cover).

–The HDMI cable is damaged.

—

H or F≥Check and correct the speaker cable connections.

≥There is something unusual. (The service number displayed after H and F

depends on the unit’s condition.)

≥Check the unit using the troubleshooting guide. If the service number does not

disappear, do the following.

1 Disconnect the plug from the household mains socket, wait a few seconds,

then reconnect it.

2 Press [Í/I] to turn the power on. (The unit may be fixed.)

If the service number does not disappear despite doing the above, request service

from the dealer. Inform the dealer of the service number when requesting service.

—

40–42

NOT CONDITIONAL

NO SURROUND SPEAKER

≥7.1ch Virtual Surround is available only when playing 6ch sources or above.

≥7.1ch Virtual Surround is available only when speaker setting is set to 5.1ch.

29, 37

e.g., Display

Lens cleaner: RP-CL720E

≥This lens cleaner is not for sale in Germany and may not be

for sale depending on the region.

≥This lens cleaner is sold as specific for DIGA, but can be

used without problem on this unit as well.

Reference

SCBT100EGEB-RQT9161-B.book Page 39 Thursday, April 10, 2008 3:57 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BT100 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BT100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info