Bedienungsanleitung Panasonic SC-BT100 (Seite 42 von 48) (Englisch)

61553

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

RQT9161

Troubleshooting guide

Sound (Continued) Page

Card

iPod operation

Radio

Other difficulties with playback

When other Panasonic products respond to this remote control

Change the remote control code on this unit and the remote control (the two must match) if you place other Panasonic products

close together.

No surround sound. ≥Press [ÎVS] to turn on Dolby Virtual Speaker.

≥Press [ÎPLIIx] to turn on Dolby Pro Logic IIx/Dolby Pro Logic II.

≥Press [NEO:6] to turn on DTS NEO:6.

Cannot switch audio. ≥There are discs for which audio cannot be changed because of how the disc was

created.

—

The capacity of the SD card

decreased.

≥When a BD-Video that supports the virtual package is used, and an SD card is in

the slot, data may be written to the SD card. Erase the data by using “BD-Video

Data Erase”, format the card or use a new card.

MPEG-2 motion pictures

and music on an SD card

cannot be played.

≥Data that can be played from an SD card are AVCHD and JPEG data. 16

The contents of the card

cannot be read.

≥The card is not compatible or the contents on the card may be damaged.

≥Turn off and then turn on the unit again.

—

Cannot charge or operate. ≥Check that the iPod is connected firmly.

≥The battery of the iPod is depleted. Charge the iPod, and then operate again.

—

Cannot display iPod videos/

photos on the TV.

≥Make sure that TV is connected to the VIDEO OUT or S VIDEO OUT terminal on

this unit.

≥Operate the iPod menu to make the appropriate video/photo output settings for

your TV. (Refer to operating instructions for your iPod.)

—

Distorted sound or noise is

heard. “ST” flickers or does

not light.

≥Adjust the position of the antenna.

≥Use an outdoor antenna.

—

A beat sound is heard. ≥Turn the TV off or move it away from the unit. —

Audio and video

momentarily pause.

≥This occurs between playlist chapters or scenes ([AVCHD]).

≥

When playing a title recorded on both layers, the unit automatically switches between

layers and plays the title in the same way as a normal programme. However, video

and audio may momentarily cut out when the unit is switching layers.

—

BD-Video or DVD-Video is

not played.

≥Ensure the disc is for the correct BD-Video region code or DVD-Video region

number, and is not defective.

≥

You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.

≥Some BD-Video can only be output with HDMI.

Cover

—

Picture-in-picture is not

played with BD-Video.

≥Confirm whether the disc supports picture-in-picture.

—

The virtual package is not

played with BD-Video.

≥Confirm whether the disc supports the virtual package.

≥The inserted SD card does not have sufficient available capacity.

≥The SD card is write-protected.

≥Sub contents copied to an SD card are provided by the disc producer as a part of

the BD-Video content. Even if you record images and audio onto an SD card, it

cannot be played as a virtual package.

—

Alternative soundtrack and

subtitles cannot be

selected.

≥The languages are not recorded on the disc.

≥You may not be able to use the on-screen menu to change the soundtrack and

subtitles on some discs. Use the disc’s menus to make changes.

—

16, 26

No subtitles. ≥Subtitles are not recorded on the disc.

≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.

—

Angle cannot be changed. ≥Angles can only be changed during scenes where different angles are recorded. —

The resume play function

does not work.

≥Memorized positions are cancelled when

–pressing [∫ STOP] several times.

–opening the disc tray.

≥The resume play function may not work depending on the disc.

—

1 Press [BD/SD] to select “BD/DVD/CD” or “SD”.

2 While stopped, press [SETUP].

3 Press [3, 4] to select “General” and press [OK].

4 Press [3, 4] to select “Remote Control” and press

[OK].

5 Press [3, 4] to select the code (1 or 2) and press

[OK].

To change the code on the remote control

While pressing [OK], press and hold the numbered

button ([1] or [2] ) for more than 5 seconds.

7 Press [OK].

When the following indicator

appears on the unit’s display

and you are unable to operate

the unit

Press and hold [OK] and the

indicated number button at the

same time for more than

5 seconds.

Set Code 1

Set Code 2

Remote Control

NOTE

The unit’s remote control code

e.g., Display

SCBT100EGEB-RQT9161-B.book Page 42 Thursday, April 10, 2008 3:57 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BT100 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BT100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info