Bedienungsanleitung Panasonic SC-BT222 (Seite 36 von 48) (Englisch)

533956

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

VQT2S28

Reference

Troubleshooting guide

Before requesting service, please perform the

following steps.

The following do not indicate a problem with this unit:

≥ Regular disc rotating sounds.

≥ Image disturbance during search.

∫ Unit doesn’t respond to remote control or

front panel buttons.

Press and hold [Í/I] on the main unit for 5 seconds.

jIf still unable to turn the unit off, disconnect the AC mains

lead, wait 1 minute, then reconnect the AC mains lead.

∫ Cannot eject disc.

The unit may have a problem.

While the unit is off, press and hold [SKIP9] on the remote

control and [< OPEN/CLOSE] on the unit at the same time for

more than 5 seconds.

To return to the factory preset.

≥ Select “Yes” in “Default Settings” in the Setup menu. (> 34)

To return all settings to the factory preset.

≥ Reset the unit as follows:

While the unit is off, press and hold [+ VOLUME], [< OPEN/

CLOSE] and [Í/I] on the main unit at the same time for more

than 5 seconds.

The remote control doesn’t work properly.

≥ The remote control and main unit are using different codes.

Change the code on the remote control. (> 17)

≥ It may be necessary to set the code of the remote control

again after changing the batteries for remote control. (> 17)

Disc cannot be played.

≥ The disc is dirty. (> 7)

≥ Check the region code.

Still pictures (JPEG) do not playback normally.

≥ The images that were edited on the PC, such as Progressive

JPEG, etc., may not playback.

The TV tuner mode is not displayed when the TV is

switched on.

≥ This phenomenon may occur, depending on the TV setting,

when “Quick Start” is set to “On”.

≥ Depending on the TV, this phenomenon may be prevented

by reconnecting the HDMI cable to a different HDMI input

terminal or by changing the HDMI auto connection setting.

You have forgotten your ratings password.

You want to cancel the ratings level.

While the disc tray is empty and “BD/DVD” is selected as a

source, press and hold [SKIP:] on the remote control and

[1] (Play) on the unit at the same time for more than 5

seconds. The ratings level returns to the factory preset.

No power.

≥ Insert the AC mains lead securely into a household mains

socket. (> 16)

The unit switches to standby mode.

≥ When the time set for the sleep timer has passed, the power

will be turned off. (> 8)

≥ One of the unit’s safety devices is activated. Press [Í/I] on

the main unit to turn the unit on.

The main unit is turned off when the input for the TV is

changed.

≥ This is a normal phenomenon when using VIERA Link

(HDAVI Control 4 or later). For details please read the

operating instructions for the TV.

The display is dim.

≥ Change “FL Display” in the Setup menu. (> 33)

Do you have the latest firmware installed?

Firmware updates may be released to correct operating

irregularities that are discovered with certain movies.

For details, refer to the included sheet about the latest

firmware updates.

Make the following checks.

If the problem remains unresolved, consult your

dealer for instructions.

General operation

Power

Displays

SCBT222EBEG_VQT2S28-B.book 36 ページ２０１０年２月１２日　金曜日　午後１時４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BT222 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BT222

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info