Bedienungsanleitung Panasonic SC-BT222 (Seite 37 von 48) (Englisch)

533956

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Reference

VQT2S28

The images from this unit do not appear on the TV.

Picture is distorted.

Jittering occurs.

≥ An incorrect resolution is selected in “HDMI Video Format”.

Reset the setting as follows:

While the disc tray is empty and “BD/DVD” is selected as a

source, press and hold [1] (Play) and [∫] (Stop) on the main

unit at the same time for more than 5 seconds to cancel the

setting.

≥ When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio

are not output in bitstream, select “Yes” in “Default Settings”

and make proper settings. (> 34)

≥ The unit and television are using different video systems.

While stopped, keep pressing [∫] (Stop) and [< OPEN/

CLOSE] on the main unit for 5 or more seconds. The system

switches from PAL to

NTSC

or vice versa.

≥ The system used on the disc doesn’t match your television.

– PAL discs cannot be correctly viewed on an NTSC

television.

– This unit can convert NTSC signals to PAL60 for viewing

on a PAL television (“NTSC Contents Output” in the

“Picture”).

Video is not output.

≥ Set the “High Clarity Sound” in the playback menu to “Off” to

use the VIDEO OUT terminal. (> 30)

Video is not output in high definition.

≥ Confirm that “HDMI Video Format” in the Setup menu is set

properly. (> 33)

A black band is displayed around the edge of the screen.

The aspect ratio of the screen is abnormal.

≥ Confirm the “TV Aspect” is set properly. (> 33)

≥ Adjust the aspect setting on the television.

(Adjustment using “Screen Aspect” (> 21) on the unit is also

possible.)

After choosing “Home Cinema” in “Speaker Selection” with

the TV’s remote control, the TV’s input selection also changes.

≥ Disconnect the HDMI cable from the TV and reconnect it to a

different HDMI IN terminal.

No sound.

Low volume.

Distorted sound.

Cannot hear the desired audio type.

≥ Check connections to speakers and other equipment.

(> 12s16)

≥

To output audio from a device connected with an HDMI cable,

set “HDMI Audio Output” to “On” in the Setup menu. (

34)

≥ When “BD-Video Secondary Audio” is set to “On”, Dolby

TrueHD, Dolby Digital Plus, DTS-HD Master Audio and

DTS-HD High Resolution Audio are output as Dolby Digital

or DTS Digital Surround.

≥ Re-master will not work when the bitstream signal is output

from the HDMI AV OUT terminal. (> 30)

≥ Depending on the connected equipment, the sound may be

distorted if this unit is connected with an HDMI cable.

No surround sound.

≥ Press [SURROUND] to select a surround effect. (> 19)

Cannot switch audio.

≥ When audio is output from the HDMI AV OUT terminal, set

“Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD” or

“MPEG Audio” to “PCM”. (> 32)

No sound from the TV.

≥ Press [EXT-IN] to select the corresponding source. (> 18)

≥ The ARC (Audio Return Channel) function is not available.

Instead, use an optical digital audio cable or an audio cable

to have the TV sound. (> 14, 15)

≥

If the TV is not ARC compatible and only the HDMI connection

is used, an extra audio connection is necessary (

14, 15).

TV screen and video Sound

SCBT222EBEG_VQT2S28-B.book 37 ページ２０１０年２月１２日　金曜日　午後１時４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BT222 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BT222

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info