Bedienungsanleitung Panasonic SC-BTT880 (Seite 44 von 52) (Englisch)

531476

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

VQT4Z42

The unit does not turn off.

1 Press and hold [Í/I] on the main unit for 3

seconds. (If still unable to turn the unit off,

disconnect the AC mains lead, wait 1 minute,

then reconnect the AC mains lead.)

2 Reset the unit as follows:

While the unit is off, press and hold [VOL +],

[< OPEN/CLOSE] and [Í/I] on the main unit

at the same time for more than 5 seconds.

The images from this unit do not appear on

the TV.

Picture is distorted.

Jittering occurs.

¾ An incorrect resolution is selected in “HDMI

Video Format”. Reset the setting as follows:

1 Turn the unit on.

2 Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

j“00 RET” is displayed on the unit’s display.

3 Repeatedly press [1] (right) on the remote

control until “04 PRG” is displayed on the

unit’s display.

4 Press and hold [OK] for at least 3 seconds.

Set the item again. (> 35)

jWhen Dolby Digital Plus, Dolby TrueHD,

and DTS-HD audio are not output properly,

select “Yes” in “Default Settings” and make

proper settings. (> 39)

¾ The unit and television are using different

video systems.

1 Turn the unit on.

2 Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

j“00 RET” is displayed on the unit’s display.

3 Repeatedly press [1] (right) on the remote

control until “05 P/N” is displayed on the unit’s

display.

4 Press and hold [OK] for at least 3 seconds.

The system switches from PAL to NTSC or

vice versa.

¾ The system used on the disc doesn’t match

your television.

jPAL discs cannot be correctly viewed on an

NTSC television.

¾ When “3D BD-Video Playback” in the Setup

menu is set to “Automatic”, images may not

be output depending on the connection

method. After removing the disc from this unit,

select “Set before play” in the Setup menu,

and select “2D Playback” in the setup screen

displayed when playing 3D discs. (> 37)

¾ If irregular colouring occurs on your TV, turn

the TV off for about 30 minutes.

If it persists, move the speakers further away

from the TV.

Video is not output in high-definition.

¾ Confirm that “HDMI Video Format” in the

Setup menu is set properly. (> 35)

3D video is not output.

¾ Change the settings as required by the

connected TV format. (> 37, “3D Type”)

¾ Are the settings on this unit and the TV

correct? (> 24)

¾ Depending on the connected TV, the video

being played back might switch to 2D video

due to changes in resolution etc. Check the

3D setting on the TV.

¾ Check that proper HDMI video input is

selected on the TV.

3D video is not output correctly as 2D.

¾ Select “Set before play” in the Setup menu,

and select “2D Playback” in the setup screen

displayed when playing 3D discs. (> 37, “3D

BD-Video Playback”)

¾ Discs that have recorded titles with Side by

side (2 screen structure) and that can be

enjoyed in 3D are played back in accordance

with the settings of the TV.

A black band is displayed around the edge of

the screen.

The aspect ratio of the screen is abnormal.

Confirm the “TV Aspect” is set properly. (

38)

¾ Adjust the aspect setting on the television.

No sound.

Low volume.

Distorted sound.

Cannot hear the desired audio type.

¾ Check connections to speakers and other

equipment. (> 12s17)

¾ Ensure the speaker settings for your

speakers are correct. (> 40)

¾ To output audio from a device connected with

an HDMI cable, set “HDMI Audio Output” to

“On” in the Setup menu. (> 36)

¾ When “BD-Video Secondary Audio” is set to

“On”, Dolby TrueHD, Dolby Digital Plus,

DTS-HD Master Audio and DTS-HD High

Picture

Sound

SC-BTT880EB-VQT4Z42_mst.book 44 ページ２０１３年３月２１日　木曜日　午前９時４９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BTT880 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BTT880

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info