Bedienungsanleitung Panasonic SC-BTT880 (Seite 46 von 52) (Englisch)

531476

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

VQT4Z42

The wireless link indicator is flashing.

¾ There is no link between the main unit and the

wireless system. Turn the wireless system off

and then back on. Alternatively, turn the

wireless system off, disconnect the AC mains

lead and then reconnect it.

The wireless link indicator does not light.

¾ Check that the main unit is turned on, and the

wireless system is turned on.

¾ Ensure that the digital transmitter is fully

inserted into the slot of the main unit. (> 16)

The wireless link indicator keeps flashing

between red and green.

There is a power supply problem. Consult the dealer.

I can’t connect to the network.

¾ Confirm the network connection and settings.

(> 16, 18, 37)

¾ There may be obstacles that prevent the unit

from detecting your home network. Bring the

unit and the wireless router closer to each

other.

¾ Check the operating instructions for each

device and connect accordingly.

When using wireless LAN connection, video

from the DLNA Certified media server is not

played back or video frames are dropped

during playback.

¾ Higher transfer rate router such as 802.11n

(2.4 GHz) wireless router may solve the

problem. If you use 802.11n (2.4 GHz)

wireless router, it is necessary to set the

encryption type to “AES”.

Simultaneous use with a microwave, cordless

telephone etc. at 2.4 GHz may result in

connection interruptions or other problems.

¾ On the “Wireless Settings” screen (> 37), the

continuous lighting of at least 4 “Reception”

indicators is the target for a stable connection.

If 3 or fewer indicators are lit or the

connection is being interrupted, change the

position or angle of your wireless router and

see if the connection state improves. If there

is no improvement, connect to a wired

network and perform the “Easy Network

Setting” (> 18) again.

Messages

The following messages or service numbers may

appear on the TV or unit’s display.

Cannot play.

¾ You inserted an incompatible disc.

Cannot play on this unit.

¾ You tried to play a non-compatible image.

¾ Confirm “SD” on the unit’s display is not

displayed and re-insert the card.

No disc inserted.

¾ The disc may be upside down.

$ This operation is not available.

¾ Some operations are unsupported by the unit.

(For example, reverse slow-motion, etc.)

IP address is not set.

¾ The “IP Address” in “IP Address / DNS

Settings” is “---. ---. ---. ---”. Set the “IP

Address”, “Subnet Mask”, and “Gateway

Address”. (Select the automatic address

acquisition if necessary.)

The wireless access point currently has a low

network security setting. It is recommended to

change to a higher setting.

¾ Set a stronger network security level referring

to the wireless router operating instructions.

Wireless system (SH-FX71)

Network

On the television

SC-BTT880EB-VQT4Z42_mst.book 46 ページ２０１３年３月２１日　木曜日　午前９時４９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-BTT880 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-BTT880

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info