Bedienungsanleitung Panasonic SC-EN38 (Seite 9 von 12) (Englisch)

68115

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

RQTV0293

You can choose one of four types of sound quality.

Press [PRESET EQ] to select the sound quality.

Each time you press the button:•

Digital remaster is effective on CD (MP3) and USB

Analog remaster is effective on iPod and Music Port

This feature reproduces the frequencies lost during recording to give you

a sound closer to the original.

Press [REMASTER] during play to select “RE-MASTER ON”.

Each time you press the button:•

Enables you to enjoy the powerful bass effect.

Press [D.BASS] to turn the D.BASS function on/off.

The actual effect depends on the disc.

You can create a three-dimensional sound field when listening to stereo

sound.

Press [SURROUND] to turn the Live Virtualizer on/off.

The actual effect depends on the source played.

Sound adjustment

Note

MP3

➡ Page 3 for the buttons position of remote control.

Sound quality

Live Virtualizer

Enhancing the bass

Re-master -

Enjoying more natural sound

HEAVY CLEAR SOFT

EQ-OFF VOCAL

(Adds punch to

rock)

(Clarifies higher

sounds)

(For background

music)

(Canceled) (Adds gloss to vocals)

Note

The SLEEP timer can turn the unit off after a set time.

Press [SLEEP] to turn the SLEEP function on/off.

Each time you press the button:

OFF (Canceled)

g To check the remaining time

Press [SLEEP] once

The play timer and sleep timer can be used together. The sleep timer

always has priority. Be sure not to overlap timer settings.

•

You can set the timer to come on at a certain time to wake you up.

Preparation:

Turn the unit on and set the clock.

Prepare the music source (disc, radio, iPod or music port) and set the

volume.

 Press [CLOCK/TIMER] repeatedly to select play timer.

CLOCK zPLAY Original display

 Within 5 seconds, press [u, 2] or [i, 1] to set the starting time.

 Press [CLOCK/TIMER] to confirm.

 Repeat steps 2 and 3 to set the finishing time.

To activate the timer

 Press [zPLAY] to turn on the timer.

 Press [^] to turn off the unit.

To Action

Change the settings Repeat steps 1 to 4 and 6.

Change the source or

volume

 Press [zPLAY] to clear zPLAY indicator

from the display.

 Make changes to the source or volume.

 Perform steps 5 and 6.

Check the settings

(when the unit is on or

in standby mode)

Press [CLOCK/TIMER] repeatedly to select

zPLAY.

Cancel

Press [zPLAY] to clear the timer indicator

from the display.

The timer will start at the preset time, with the volume increasing

gradually to the preset level.

The timer comes on at the set time every day if the timer is on.

The unit must be in the standby mode for the timer to function.

If you turn the unit off and on again while the timer is functioning, the

finish time setting will not be activated.

When external unit is selected as the source when the timer comes

on, the system turns on and engages external unit as the source. If

you wish to playback from the portable audio equipment, activate the

equipment’s play mode and increase the volume. (See the portable

audio equipment’s instruction manual.)

•

Timer

This is a 24-hour clock.

 Press [CLOCK/TIMER] to set the clock.

 Press [u, 2] or [i, 1] to select the time within 5 seconds.

(Press and hold to change the time faster.)

 Press [CLOCK/TIMER] again.

g To display the clock when the unit

is on

Press [CLOCK/TIMER]

Note

The clock is accurate to within ±60 seconds a month. Readjust if

necessary.

Set again after disconnecting the AC mains lead or power failure.

•

Setting the time

Sleep timer

Play timer

30MIN 60MIN 90MIN 120MIN

Note

The remote control and main unit are factory-set to “REMOTE 1” mode.

If your remote control affects other equipment during operation, you can

switch to operate in “REMOTE 2” mode.

To switch to “REMOTE 2” mode

 Press [FM/AM/MUSIC P.] to select “AM”.

 (While pressing [FM/AM/MUSIC P.] on the main unit)

Press and hold [2] until “REMOTE 2” appears on the main unit

display.

 Press and hold [ENTER] and [2] for at least 2 seconds.

The main unit and remote control are now set to operate in

“REMOTE 2” mode.

To return to “REMOTE 1” mode

Perform steps 1 to 3 but use [1] instead of [2] for steps 2 and 3.

(“REMOTE 1” appears on the main unit during step 2.)

The remote control cannot work with the main unit if their modes are

different.

“REMOTE 1” or “REMOTE 2” appears on the main unit when you operate

the remote control.*

* If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)

Press and hold [ENTER] and [1] on the remote control for at least 2

seconds.

If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)

Press and hold [ENTER] and [2] on the remote control for at least 2

seconds.

Note

RE-MASTER ON RE-MASTER OFF

Changing the main unit and

remote control mode

g Display function

Press [DISPLAY] repeatedly during play or pause.

For other operating functions, they are similar as those described in “Disc

operations” (➡ page 5 and 6).

To remove the USB mass storage device

Select a source other than “USB”.

Removing the USB mass storage device with it selected as a source can

damage the data stored in the device.

g Compatible device

Devices which are defined as USB mass storage class:

USB devices that support bulk only transfer.

USB devices that support USB 2.0 full speed.

g Supported Format

Files must have the extension “.mp3” or “.MP3”.

CBI (Control/Bulk/Interrupt) is not supported.

A device using NTFS file system is not supported [Only FAT 16/32

(File Allocation Table 16/32) file system is supported].

Depending on the sector size, some files may not work.

This unit can access up to 255 albums and 2500 tracks.

The maximum number of tracks in a folder are 999 tracks.

Only one memory card will be selected when connecting a multiport

USB card reader. Typically the first memory card inserted.

Disconnect the USB card reader from the unit when you remove the

memory card. Failure to do so may cause malfunction to the device.

When you connect your digital audio player to the USB jack, it charges

all the time except in standby mode.

•

SC-EN38_E,EB,GN,GCS (RQTV0293)_MP.indd 9 2/18/2008 2:11:36 PM

Panasonic SC-EN38 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-EN38

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info