Bedienungsanleitung Panasonic SC-HC395 (Seite 10 von 24) (Englisch)

735111

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

RQT0A88

[SC-HC397]

Listening to DAB/DAB+

Preparation

≥Make sure that the DAB antenna is connected. (l5)

≥Turn the unit on.

To listen to DAB/DAB+ broadcasts, the available

stations need to be memorised in this unit.

≥This unit will automatically start the “DAB AUTO

SCAN” and memorise the stations that are available

in your region if the memory is empty.

Press [RADIO/AUX] repeatedly to select “DAB+”.



≥“SCAN FAILED” is displayed when the auto scan is

unsuccessful. Locate the position with the best reception

(l11, “To verify or improve the signal reception quality”) and

then re-scan DAB/DAB+ stations.

∫To re-scan DAB/DAB+ stations

When new stations are added or when the antenna

has been moved, reperform the auto scan.

1Press [PLAY MENU] to select “AUTOSCAN” and

then press [OK].

2While “START ?” is flashing,

Press [OK].



Preparation*

1Press [RADIO/AUX] repeatedly to select “DAB+”.

2Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

3Press [3,4] to select “STATION” and then press

[OK].

1Press [RADIO/AUX] repeatedly to select “DAB+”.

2Press [:/6] or [5/9] to select the

station.

You can preset up to 20 DAB/DAB+ stations.

Preparation

Press [RADIO/AUX] repeatedly to select “DAB+”.

1While listening to a DAB/DAB+ broadcast

Press [OK].

2Press [3,4] to select the desired preset channel

number and then press [OK].



≥You cannot preset stations when the station is not

broadcasting or when the secondary service is selected.

≥The station occupying a channel is erased if another station

is preset in that channel.

∫Listening to preset DAB/DAB+ stations

Preparation*

1Press [RADIO/AUX] repeatedly to select “DAB+”.

2Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

3Press [3,4] to select “PRESET” and then press

[OK].

1Press [RADIO/AUX] repeatedly to select “DAB+”.

2Press [:/6] or [5/9] to select the

station.



≥To select by preset, make sure that stations have already

been preset manually.

Some DAB/DAB+ stations provide a secondary service

as well as the primary service. If the station you are

listening to is providing secondary service, “ ” will be

displayed.

1While “ ” is displayed.

Press [PLAY MENU] repeatedly to select “DAB

SECONDARY”.

2Press [3,4] to select the secondary service and

press [OK].



≥The setting will go back to primary service when changes are

made (e.g. the station is changed).

* The “TUNEMODE” setting is memorised until it is changed.

Memorising stations

≥When updating the memory with the auto scan, preset

stations will be erased. Preset them again (lright).

Listening to the memorised stations

Presetting DAB/DAB+ stations

≥To add additional preset stations, select the station using the

method mentioned in “Listening to the memorised stations”

(lleft).

Listening to the secondary service

SC-HC397-395EGEBGN~RQT0A88-1B.book 10 ページ２０１７年１月５日　木曜日　午前１０時３４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-HC395 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-HC395

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info