Bedienungsanleitung Panasonic SC-HC395 (Seite 12 von 24) (Englisch)

735111

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

RQT0A88

You can preset up to 30 channels.

Preparation

≥Make sure that the antenna is connected. (l5)

≥Turn the unit on.

≥Press [RADIO/AUX] repeatedly to select “FM”.



≥A station previously stored is overwritten when another

station is stored in the same channel preset.

1Press [PLAY MENU] to select “A.PRESET”.

2Press [3,4] to select “LOWEST” or “CURRENT”

and then press [OK].

LOWEST:

CURRENT:

To begin auto preset with the current frequency.*

{. The tuner starts to preset all the stations it can receive

into the channels in ascending order.

* To change the frequency, refer to “Manual tuning and

presetting”.

1Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

2Press [3,4] to select “PRESET” and then press

[OK].

3Press [:/6] or [5/9] to select the

channel.

∫Manual tuning and presetting

Select a radio broadcast.

1Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

2Press [3,4] to select “MANUAL” and then press

[OK].

3Press [:/6] or [5/9] to tune to the

required station.

≥To start automatic tuning, press and hold [:/6] or

[5/9] until the frequency starts scrolling. Tuning

stops when a station is found.

To preset the channel

4While listening to the radio broadcast, press [OK].

5Press [3,4] to select the channel and then press

[OK].

∫To improve FM sound quality

1While receiving FM broadcasts, press

[PLAY MENU] repeatedly to select “FM MODE”.

2Press [3,4] to select “MONO” and then press

[OK].

≥This setting can be preset and memorised. To do so,

continue to step 4 of “Manual tuning and presetting”.



≥Select “STEREO” in step 2 to return to stereo broadcasts.

≥“MONO” is cancelled if the frequency is changed.

∫To display the current FM signal status

While receiving FM signal, press [DISPLAY].

≥For Continental Europe:

While receiving FM signal, press [PLAY MENU]

repeatedly to display “FM STATUS” and then press

[OK].

∫To display RDS text data

(For Continental Europe only)

Press [DISPLAY] to display the text data.

≥Each time you press the button:



≥“STEREO” is displayed when this unit tunes to a stereo

broadcast.

≥The unit can display the text data transmitted by the radio

data system (RDS) available in some areas. (RDS displays

may not be available if reception is poor.)

Listening to FM radio

Presetting stations automatically

To begin auto preset with the lowest frequency

(FM 87.50).

Listening to a preset channel

“FM ST”: The FM signal is tuned and in stereo.

“FM”: There is no tuned signal or the FM signal

is in monaural.

“FM MONO”: “MONO” is selected in step 2 of “To

improve FM sound quality” (labove).

“PS”: Programme service

“PTY”: Programme type

“FREQ”: Frequency display

SC-HC397-395EGEBGN~RQT0A88-1B.book 12 ページ２０１７年１月５日　木曜日　午前１０時３４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-HC395 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-HC395

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info