563924
15
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
15
RQT9886
ENGLISH
“ERROR”
Incorrect operation is performed. Read the instructions and try
again.
“F” (“ ” stands for a number.)
There is a problem with this unit.
Write down the displayed number, disconnect the AC mains lead
and consult your dealer.
“ILLEGAL OPEN”
Sliding door is in the wrong position. Turn the unit off and on
again. If this display appears again, consult the dealer.
“IPOD_DOCK OVER CURRENT ERROR”
“USB OVER CURRENT ERROR”
The iPhone/iPad/iPod is drawing too much power. Disconnect the
iPhone/iPad/iPod and turn the unit off and on again.
The USB device is drawing too much power. Select a source other
than “USB”, remove the USB and turn the unit off.
“NODEVICE”
The iPhone/iPad/iPod or USB device is not inserted correctly.
Read the instructions and try again (l 6).
The battery of the iPhone/iPad/iPod is depleted. Charge the
iPhone/iPad/iPod and turn it on before connecting.
“NO DISC”
Insert the disc to be played (l 6).
“NO PLAY
A CD that is not in CD-DA or MP3 format is inserted. It cannot be
played.
Examine the content. You can only play supported format. (l 16)
The files in the USB device can be corrupted. Format the USB
device and try again.
The unit may have a problem. Turn the unit off and then on again.
“NOT SUPPORTED”
You have connected an iPhone/iPad/iPod that cannot be played
(l 16).
If the iPhone/iPad/iPod is compatible, turn it on and connect it
correctly.
“PLAYERROR”
You played an unsupported MP3 file. The system will skip that
track and play the next one.
“READING”
The unit is checking the CD information. After this display has
disappeared, start operating.
“REMOTE ” ( ” stands for a number.)
The remote control and this unit are using different codes. Change
the code on the remote control.
When “REMOTE 1” is displayed, press and hold [OK] and [ ]
for at least 4 seconds.
When “REMOTE 2” is displayed, press and hold [OK] and [CD/
RADIO] for at least 4 seconds.
“VBR”
The system cannot show the remaining play time for variable bit
rate (VBR) tracks.
Unit and media care
Pull out the AC mains lead from the outlet before
maintenance.
Clean this unit with a soft, dry cloth
When dirt is heavy, wring a wet cloth tightly to wipe the dirt,
and then wipe it with a dry cloth.
When cleaning the speaker covers, use a fine cloth.
Do not use tissues or other materials that can fall apart.
Small pieces may get stuck inside the speaker cover.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using chemically treated cloth, carefully read the
cloth’s instructions.
Maintenance of the lens
Clean the lens regularly to prevent malfunctions. Use a dust
blower to remove dust and a cotton swab if it is extremely
dirty.
You cannot use a CD type lens cleaner.
Do not leave the sliding door open for prolonged periods of
time. This will cause the lens to get dirty.
Be careful not to touch the lens with your fingers.
Clean discs
Wipe with a damp cloth and then wipe dry.
Disc handling precautions
Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
Do not attach labels or stickers to discs.
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
Do not use the following discs:
Discs with exposed adhesive from removed stickers or
labels (rented discs etc.).
Discs that are badly warped or cracked.
Irregularly shaped discs, such as heart shapes.
To dispose or transfer this unit
The unit may keep the user settings information in the
unit. If you discard this unit either by disposal or
transfer, then follow the procedure to return all the
settings to the factory defaults to delete the user
settings.
(l 13, “To return all settings to the factory defaults”)
The operation history may be recorded in the
memory of this unit.
DO DO NOT
Lens
SC-HC49EG~RQT9886-R.book 15 ページ 2014年4月3日 木曜日 午前9時29分
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

panasonic-sc-hc49

Suche zurücksetzen

  • Beim einlegen einer DVD lässt sich diese nicht abspielen Eingereicht am 8-2-2024 12:08

    Antworten Frage melden
  • Ich habe mein SC-HC49 vom Stromnetz getrennt. Nach dem neuen Anschluss an das Stromnetz erscheint im Display "Insert USB" Eingereicht am 11-9-2023 16:11

    Antworten Frage melden
  • Das Gerät schaltet sich (nach "normalem" Abschalten!) immer wieder mal selbst ein!
    Hilfe! Eingereicht am 30-10-2020 16:02

    Antworten Frage melden
  • kann das gerät ohne usb - anschluß genutzt werden ? Eingereicht am 2-9-2018 09:39

    Antworten Frage melden
  • Im Display wechselt Anzeige zwischen USB und Insert ständig, so das Gerät sich nicht bedienenen lässt Eingereicht am 30-4-2018 19:17

    Antworten Frage melden
  • Mein Gerät lässt sich nicht einschalten, keine Anzeige Eingereicht am 3-10-2017 16:11

    Antworten Frage melden
  • fernbedienung von anlage reagiert nicht.im display wird remote 1 angezeigt .batterien sind neu Eingereicht am 22-4-2017 10:35

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic SC-HC49 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic SC-HC49

Panasonic SC-HC49 Bedienungsanleitung - Deutsch, Holländisch - 92 seiten

Panasonic SC-HC49 Bedienungsanleitung - Dänisch, Französisch - 68 seiten

Panasonic SC-HC49 Bedienungsanleitung - Französisch, Italienisch - 92 seiten

Panasonic SC-HC49 Bedienungsanleitung - Schwedisch, Finnisch - 68 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info