Bedienungsanleitung Panasonic sc hc7 (Seite 20 von 32) (Englisch)

160644

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RQT9383

Connecting to network

Checking the computer name of your computer

While importing music data or backing up/restoring recording

data, entering PC name will be requested in the procedure.

Confirm your computer’s PC name and enter the exactly same

name on this unit.

e.g.) Windows Vista

1. “ (Start)”

➾

Select “Control Panel”.

2. Select “System”.

3. Conﬁ rm the characters for “Full computer name” on the

item “Computer name, domain and workgroup settings” and

take a note.

e.g.) Windows XP Home Edition

1. “Start”

➾

Select “Control Panel”.

2. Select “System”.

3. Conﬁ rm the characters for “Full computer name” item on

“Computer Name” tab and take a note.

Checking and setting the shared folder

You need to set the shared folder on the computer to import

music data or back up/restore recording data.

e.g.) Windows Vista

1. Right-click the folder to make the sharing setting.

➾

Select

“Properties”.

2. Select “Sharing” tab.

➾

Select “Advanced Sharing”. (If

you are requested to enter or conﬁ rm the administrator

password, enter the password or provide conﬁ rmation

information.)

➾

Add the check mark for “Share this folder.”

(Take a note of the characters for “Share name”.)

3. Select “Permissions”.

➾

Add the check mark for “Allow” of

“Full Control”.

➾

Select “OK”.

4. Select “OK”.

• Checking the Share Permissions level (only for backing

up/restoring data)

If the Share Permissions level is “Reader”, backing up/

restoring recording data is not possible.

1. Right-click the share folder.

➾

Select “Share”.

2. If the Share Permissions level for the user or group is

“Reader”, click “

” and select an item other than “Reader”

3. Select “Share”.

Restore to the original setting after backing up/restoring

recording data is complete.

e.g.) Windows XP Home Edition

1. Right-click the folder to make the sharing setting.

➾

Select

“Sharing and Security”.

2. Add the check marks for “Share this folder on the network”

and “Allow network users to change my ﬁ les”. (Take a note

of the characters for “Share name”.)

3. Select “OK”.

Connect this unit directly to the computer

To import (

➡

page 21), back up (

➡

page 22) or restore

(

➡

page 22) data, you can also connect this unit directly to the

computer with the LAN cross cable. In this case, you need to

change the settings on this unit and computer.

To LAN (over 100BASE-T) terminal

LAN cross cable

(commercially available)

This unit

To LAN terminal

Settings on this unit

Set each item as below on the setting menu “Setting the IP

address manually” (

➡

page 23).

●

IP Address (setting example: 192.168.0.16)

Use a different IP address from the address on the

computer to connect.

●

Subnet Mask (setting example: 255.255.255.0)

255.255.255.0 is normally used.

●

Gateway

No need to set.

Settings on the computer

e.g.) Windows XP

1. Click “Control Panel”

➾

“Network Connections”

➾

“Properties” of “Local Area Connection” and then click

“Properties” of “Internet Protocol (TCP/IP)”.

2. Select “Use the following IP address” and set the IP

address and Subnet mask as below.

●

IP Address (setting example: 192.168.0.15)

Use a different IP address from the address on this unit.

●

Subnet Mask (setting example: 255.255.255.0)

255.255.255.0 is normally used.

e.g.) Windows Vista

1. Click “Control Panel”

➾

“Network and Sharing Center”

➾

“Connection”. Click “View status” for “Connection” menu

and click “Properties”.

2. Select “Networking” tab, then select “Internet Protocol

Version 4 (TCP/ IPv4)” on “This connection uses the

following items” and click “Properties”.

3. Select “Use the following IP address” and set the IP

address and Subnet mask as below.

●

IP Address (setting example: 192.168.0.15)

Use a different IP address from the address on this unit.

●

Subnet Mask (setting example: 255.255.255.0)

255.255.255.0 is normally used.

Note

●

If other values have already been set on this unit or computer,

we recommend taking a note of the contents so they can be

restored later.

●

Internet connection may be impossible when the above settings

are made on this unit and computer. Return each setting to the

original value when using Internet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc hc7 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc hc7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info