Bedienungsanleitung Panasonic sc hc7 (Seite 22 von 32) (Englisch)

160644

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RQT9383

Connecting to network

Backing up recording data in HDD to the

computer

We recommend backing up recording data on HDD to the

computer or NAS (Network Attached Storage) periodically.

The recording data at the time of backing up can be restored

even if the recording data is lost due to this unit’s malfunction.

For backup, we recommend 100BASE-T wired LAN network

connection with fast transmission speed.

Preparation

1. Connect this unit and computer to the network (

➡

page 19)

or connect this unit directly to the computer (

➡

page 20).

2. Press [

HDD]

➾

[

] (stop) to switch the selector.

PC operation

1. Create a folder called “hcbackup” to set the shared

folder (

➡

page 20).

This unit operation

2-1. Press [SETUP].

2-2. Select “Back Up/Restore HDD” on the “Maintain” tab

and conﬁ rm.

2-3. Select “Back Up HDD” to conﬁ rm.

3. Select “PC Name” to conﬁ rm.

4. Enter the PC name of backup destination to conﬁ rm.

• Enter the PC name conﬁ rmed on page 20. (English

character, number and symbol up to 15 characters. Not

case-sensitive.)

Repeat steps 3 to 4 to enter other items.

User Name: User account’s user name registered for Windows

Vista

or Windows XP

Password: Password set for the user name

Select “Start Backup” to conﬁ rm.

■

Suspending backup operation

Press [

] during backup.

➾

Select “Yes” to confirm.

■

Resuming backup operation

After the backup is suspended, turn this unit on again and

select “Yes” to confirm.

■

When backup operation is stopped due to the

PC’s abnormal termination

Press [

➾

Press [

] again to turn the unit on and restart

backup.

Note

●

The backup data is encrypted to be recorded. Therefore, the

backup data cannot be played on the computer or copied to other

devices for use. Also, the backup data can be restored only on the

original device used for backup.

●

The size of data backed up to the computer is slightly larger than

the actual recording data.

●

You cannot use suspended backup data for restoration. Finish

backup operation as soon as possible to validate the backup data.

●

Power-save Mode is adopted for Power Off Mode setting until

backup operation is complete.

●

When backup starts, the timer setting is disabled. Set the timer

again to use it.

●

In the second and subsequent back up operations, only changed/

added recording data since the last operation will be backed up

(difference backup).

Restoring backup data

When restoring the data, the HDD is reset to the

default setting at the time of purchase (No recording

data exists.) This means the HDD status returns to the

status at the time of purchase when restoring fails. Be

extremely careful when restoring the backup data.

Preparation

1. Connect this unit and computer to the network (

➡

page 19)

or connect this unit directly to the computer (

➡

page 20).

2. Press [

HDD]

➾

[

] (stop) to switch the selector.

This unit operation

1-1. Press [SETUP].

1-2. Select “Back Up/Restore HDD” on the “Maintain” tab

and conﬁ rm.

1-3. Select “Restore HDD” to conﬁ rm.

2. Select “PC Name” to conﬁ rm.

3. Enter the PC name of backup destination to conﬁ rm.

• Enter the PC name conﬁ rmed on page 20. (English

character, number and symbol up to 15 characters. Not

case-sensitive.)

4. Repeat steps 2 to 3 to enter other items.

User Name: User account’s user name registered for Windows

Vista

or Windows XP

Password: Password set for the user name

5. Select “Start Restoring” to conﬁ rm.

■

Cancelling restoring operation

Press [

➾

Select “Yes” to conﬁ rm.

●

When the operation is cancelled, all operations processed

until cancelled are cleared and no recording data exists on

the HDD. Perform the restoring operation again.

Note

●

If the restored data is properly played back on this unit, the backup

data on the computer will be unnecessary.

●

Restoring operation may be stopped due to the PC’s abnormal

termination. In this case, perform the process again from the

beginning. However, if the backup data itself has a problem, the

data cannot be restored.

●

When restoring starts, the timer setting is disabled. Set the timer

again to use it.

■

Disclaimer

Observe the following for handling backup data.

●

Do not open the backup data with application software or

change the contents.

●

Do not compress the backup data.

●

Do not change the file name of backup data or move the

storage location.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc hc7 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc hc7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info