Bedienungsanleitung Panasonic sc ht 1000 (Seite 21 von 68) (Englisch)

370470

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

INTRO

RQT7062

In some cases, interference (lines or patterning) or a very poor

picture may appear on the TV when this unit is connected. If this

happens, follow the steps below to change the video playback

channel (RF output channel) to remove the interference.

Preparation

≥Switch [HOME THEATER, TV] to “HOME THEATER”.

1 Press [FUNCTIONS] for more than 5

seconds.

The RF output channel number is displayed on the unit

display.

2 Press the numbered buttons , [3, 4]

or [W, X, CH] to select a channel

number, which differs by 2 or 3 from

the present channel number.

(For example, if the original channel number was 28, enter

31.)

≥Set the RF output channel of this unit to [– –] (RF OFF)

when this unit is connected to the TV via the 21-pin Scart

cable.

Press the numbered [0] button or [W, X, CH] to display

[– –]. Skip the step 3, if using a 21-pin Scart cable.

3 Retune your TV until you receive the

Test pattern (see above illustration).

It may be necessary to repeat step 2 above until you can see

the Test pattern clearly.

4 Press [ENTER] to finish this setting.

This unit is not designed to control (switch on or change channels) your

satellite receiver or Cable TV box, however, it can programmed to recognise

Video Plus+ Codes for Satellite stations. The Satellite receiver or Cable TV

box must be switched on and the correct station selected. Some receivers

have their own timer facility for this purpose. Please refer to your Satellite

Receiver/Cable TV box instructions for use of such timer facilities.

For your unit to recognise the Video Plus+ Codes for each satellite station,

you must program your unit which channel or AV input to record from for the

first time. Otherwise when setting a VIDEO Plus+ recording, the [– –] symbol

will appear in the channel position indicating that the unit does not know

which channel position to set. Once you have set the channel/AV input once

the unit will remember it whenever you use a Video Plus+ Code for the

station again.

Preparation

≥Turn on the television and the unit. Select video playback channel

on the TV.

≥Switch [HOME THEATER, TV] to “HOME THEATER”.

1 Press [VIDEO Plus+] .

2 Enter a Video Plus+ number from a

Satellite TV Guide for a satellite

channel.

e.g. Sky 1 using the numbered buttons.

If you make a mistake, use [2] to go back.

3 Press [ENTER] .

[– –] will appear instead of a channel number/AV input.

4 Press [2, 1] to select the channel.

5 Press [ENTER] to memorise the

setting.

The unit will now automatically set the programme position

or AV input correctly when a VIDEO Plus+ recording is set

for this satellite station in the future.

6 Press [3] to select the programme

that you have just set.

Press [CANCEL] to delete it from the timer recording list.

Repeat steps 1s6 above until you have set and deleted

dummy timer recordings for each of the satellite stations that

you will make VIDEO Plus+ recordings from.

7 Press [RETURN] when you have

finished.

Removing Interference

TV screen

Picture with interference

Unit display

Indicator when the RF

output channel is 28

(example)

Test pattern screen

RF OUTPUT CHANNEL

DVD

CH : 28

RETURN

SELECT

ENTER

Indicator after changing

the RF output channel

to 31 (example)

Unit display

Test pattern screen

RF OUTPUT CHANNEL

DVD

CH : 31

RETURN

SELECT

ENTER

(RF OFF)

...

Clear

icture

Video Plus+ Codes for Satellite

Receivers/Cable TV

--:-- --

VIDEO Plus+

Remain

12:53:00 15.7 TUE

Enter VIDEO Plus+ Number by using 0-9 keys.

2:001:0015/ 7 TUE

Mode

StopStart

Name

Date

TIMER

RECORDING

12:53:00 15.7 TUE

Press ENTER to store new programme.

PDC

OFF

BBC 1

Title

--:-- --

Remain

1:221:19BBC1 15/ 7 TUE01

Mode

Disc

space

StopStartNo.

Name

Date

TIMER

RECORDING

1:19:00 15.7 TUE

New Timer Programme

OFF

PDC

--:-- --

Remain

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc ht 1000 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc ht 1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info