Bedienungsanleitung Panasonic sc ht 1000 (Seite 27 von 68) (Englisch)

370470

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

RECORDING

RQT7062

1 Press [PROG/CHECK].

2 Press [3, 4] to select “New Timer

Programme” and press [ENTER].

3 Press [1] to move through the items

and change the items with [3, 4].

≥The current settings are shown each time you press [1].

≥You may use the numbered buttons to enter the “Name”,

“Date”, “Start” and “Stop”.

≥Name (Programme position/TV Station Name)

≥Date

[. Current date

l;:

l Next day up to one month later minus one day

l;:

l Weekly timer: SUN-SAT>MON-SAT>MON-FRI

l;:

{. Daily timer: SUN>--->SAT

≥Start (Start time)/Stop (Finish time)

The time increases or decreases in 30-minute increments if

you hold the button.

≥Mode (Recording mode ➡ page 25)

XP!#SP!#LP!#EP!#FR

^"""""""""""""""""J

≥PDC (➡ right)

ON!)OFF (– – –)

≥Title (➡page 40)

Select “Title” using [2, 1] and press [ENTER].

4 Press [ENTER] when you have

finished programming the timer.

Repeat steps 2–4 to programme other recordings.

5 Press [PROG/CHECK].

The timer recording list disappears.

6 Press [F TIMER].

The unit turns off output picture and sound from all terminals

(e.g. Scart AV and RF out terminals) and “F” lights on the

unit’s display to indicate timer recording standby has been

activated.

Manually programming timer

recordings

RETURN

SELECT

20:0019:00BBC 1 15/ 7 TUE01

Mode

Disc

space

StopStartNo.

Name

Date

1:58 SP

TIMER

RECORDING

Remain

12:56:00 15.7. TUE

ENTER

New Timer Programme

OFF

PDC

Press ENTER to store

new programme.

1:58 SP

TIMER

RECORDING

Remain

12:57:00 15.7 . TUE

22:30

15/ 7 TUE

Mode

StopStart

Name

Date

BBC 1

22:00

PDC

OFF

Title

Mode

Disc

space

StopStartNo.

Name

Date

1:58 SP

TIMER

RECORDING

Remain

12:58:00 15.7. TUE

New Timer Programme

PDC

20:0019:00BBC 1 15/ 7 TUE01

OFF

22:3022:00BBC 1 15/ 7 TUE02

OFF

Displayed if the recording

can fit in the remaining

space on the disc.

∫ To release the unit from recording standby

If you want to record something else before the programme start

time, for example:

Press [F TIMER].

The unit turns on and “F” goes out.

≥Be sure to press [F TIMER] before the programme start time to

put the unit on recording standby. Timer recording will work only

if “F” is displayed.

∫ To cancel recording when recording has

already begun

Press [F TIMER].

Recording stops.

[Note]

≥The built-in clock employs 24-hour system.

≥If the unit is not put in the timer recording standby mode at the

latest 10 minutes before the programmed timer recording

starting time, the “F” flashes on the unit display. In this case,

press [F TIMER] to put the unit in the timer recording standby

mode.

≥“F” flashes when the unit cannot go to timer recording standby

(e.g., a disc isn’t loaded, a disc that can’t be recorded to is

loaded, or the disc is protected). Check the disc carefully.

≥Even if the unit is put in the timer recording standby mode or the

timer recording is being performed, you can play a programme.

≥The actual time recorded may be longer than the programme

itself when television programmes are recorded using VIDEO

Plus+.

≥“PROG FULL” is displayed if there are already 16 programmes.

≥The remaining time displayed is based on the current recording

mode.

≥When you programme successive timer recordings to start

immediately one after the other, the unit cannot record the part

at the beginning of the later programmes (a few seconds when

recording with DVD-RAM and approximately 30 seconds when

recording with DVD-R).

∫ Setting for control of the recording starting

and ending time by special signal included in

the broadcasting signal (PDC Function)

PDC stands for Programme Delivery Control.

If a TV programme, for example a football game runs longer than

scheduled, is shortened or starts earlier or later, this function

synchronizes the recording start and stop with the actual

broadcasting start and stop of the TV programme.

Conditions for correct operation of the PDC function:

≥“ON” must be selected under “PDC” on the display.

≥The TV station must broadcast PDC signals.

≥The programme starting time must be set correctly to the

starting time listed in the newspaper/magazine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc ht 1000 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc ht 1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info