Bedienungsanleitung Panasonic sc ht 1000 (Seite 62 von 68) (Englisch)

370470

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

INFO

RQT7062

Error messages

On the television Page

On the unit’s display

Cannot finish recording

completely.

≥The programme was copy-guarded.

≥No space left on the disc.

➡Create space by erasing any unwanted programmes. [RAM]

➡Use a new disc. [RAM] [DVD-R]

≥Recording was not completed for some other reason.

—

31, 44, 46

—

Cannot record on the disc. ≥The disc is scratched. Use another disc.

≥The disc is dirty.

≥You inserted an incompatible disc.

—

Contents of this disc are

protected.

≥The programme is write-protected. Cancel the protection.

≥The disc is write-protected. Cancel Disc Protection.

Disc is full. ≥No space left on the disc.

➡Create space by erasing any unwanted programmes. [RAM]

➡Use a new disc. [RAM] [DVD-R]

31, 44, 46

—

Error has occurred. Please

press ENTER.

≥A serious, but temporary error has occurred and one of the unit’s safety devices has

activated. Press [ENTER]. The unit switches to the standby mode. Press [Í] to turn the

unit on again.

—

Finalizing is necessary for

compatible playback.

≥To enable playback of your DVD-R on compatible equipment, it is necessary to finalize it. 47

No Disc ≥You haven’t inserted a disc. Correctly insert a disc that this unit can use.

≥The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.

Please change the disc. ≥Only [< OPEN/CLOSE] on the main unit can be used.

➡Press [< OPEN/CLOSE] on the main unit to open the tray and eject the disc. The unit

automatically shuts down.

To continue play or recording, insert another disc.

—

Please check the disc. ≥Check the discs for dirt or scratches. —

Please check write protect tab

on the disc.

≥The write-protect tab on the cartridge is set to PROTECT.

Use a ballpoint pen or similar to release the write protection.

—

This disc cannot be read. ≥You inserted an incompatible disc. 8

This disc may not be played in

your region.

≥You tried to play a disc with a region number different from this unit’s region number. This

unit can only play discs with the region numbers compatible with this unit (2, ALL, or

including the number 2).

Cover

page

This is a non-recordable disc.

Cannot record.

This disc is not properly

formatted.

Formatting is necessary using

DISC INFORMATION.

≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R.

≥You inserted an unformatted DVD-RAM. Format the disc with this unit.

Your selection exceeds the

recorder’s rating limit.

≥A ratings level has been set for DVD-Video with this unit. Unlock the unit with “Ratings” in

“Disc”.

PROTECT

REMOTE DVD 

(“∑” stands for a number.)

≥The remote control and main unit are using different codes. Change the code on the

remote control.

AF F61 ≥Check and correct the speaker cord connections.

If this does not fix the problem, there is a power supply problem. Consult the dealer.

DIGITAL UNLOCK ≥There is no signal input to the OPTICAL IN terminal.

➡Make sure to check the connections and if the power of the connected equipment is

turned on.

—

NO READ ≥The disc is dirty or badly scratched.

➡Clean the disc if it is dirty.

➡The disc cannot be played if it is scratched and this display doesn’t disappear.

≥The unit cannot read the disc.

≥You have used a DVD-RAM/PD lens cleaner and it has finished.

—

SELF CHECK ≥The unit is starting up. Wait until the message disappears. —

U14 ≥The unit is hot.

➡The unit switches to standby automatically for safety reasons and you cannot operate it.

Wait for about 30 minutes for the service number to disappear.

➡Select a position with good ventilation when installing the unit.

➡Do not block the cooling fan on the rear of the unit.

—

U99 ≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby.

Now press [Í/I] on the main unit again to turn the unit on.

—

UNSUPPORT ≥You have inserted a disc the unit cannot play or record on.

≥The signal input into the OPTICAL IN terminal is not Dolby Digital or Linear PCM.

—

X HOLD ≥The Child Lock function is activated.

➡Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” disappears. 65

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc ht 1000 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc ht 1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info