Bedienungsanleitung Panasonic SC-PMX152 (Seite 7 von 36) (Englisch)

696402

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

TQBJ0992

• The following explanations are based on a

smartphone.

1 Turn this system on.

2 Press [RADIO, EXT-IN] on the remote control

repeatedly to select “NETWORK”.

3 To enter “Setting” mode

1 Press [SETUP] on the remote control repeatedly

to select “Net Setup” and then press [OK].

2Press [2, 1] on the remote control to select

“Manual” and then press [OK].

3Press [2, 1] on the remote control to select

“OK? Yes” and then press [OK].

• After pressing [OK] to confirm “OK? Yes”, the

previous network connection you have set with this

unit will be cleared.

• Alternatively, while pressing and holding down

[<, OPEN/CLOSE] on the unit, press and hold down

[1/;] on the unit for at least 4 seconds.

“Setting” blinks on the display.

4 Go to Wi-Fi settings on your compatible device.

5 Select “PMX152_AJ” or

“PMX150_AJ” to connect to this

system.

•“  ” stands for a character that is unique to each set.

• This can take up to 1 minute to appear in your Wi-Fi list.

• If this operation does not work correctly, please repeat

it several times.

• iOS device: If “Panasonic PMX152 ” or

“Panasonic PMX150 ” appears under “SET

UP NEW AIRPLAY SPEAKER...” instead, proceed to

perform steps 5 to 7 of “Method 1” to complete the

network setting procedure. ( 6)

• Make sure that DHCP is enabled for the network

setting on your compatible device.

About the network setting page:

iOS device: The settings page will be automatically

displayed in the Internet browser.

Except the iOS device: Swipe down the device's

notification bar to check for "Sign in to Wi-Fi network"

notification and tap on it to display the settings page.

• If there is no notification, open the Internet browser and

refresh the page to display the settings page. If the

settings page is not displayed, type

"http://172.19.42.1/" into the URL address field.

6 Type a device name and then select “Next”.

• The device name will be displayed as this system’s

name on the network.

• Maximum characters that can be shown: 32

• Emoji characters are not supported.

• The device name is set when “Next” is selected.

• You can also change the device name after the network

connection is set up. ( 8, “To make network-related

settings”)

7 Select your security options for this system.

To set the AirPlay password

1 Select “Yes” and then select “Next”.

2 Set your password and then select “Next”.

• You will need this password the next time this network

setting method is used.

• If you have performed a network reset ( 18) , the

password will be cleared.

To skip this setting

Select “No” and then select “Next”.

• You can also change this setting after the network connection

is set up. (



8, “To make network-related settings”)

Select your network name (SSID) and type the

password.

• Check the wireless router for the network name (SSID)

and the password.

• A list of network names (SSIDs) will be appeared when

you select the “Network Name” box.

• To show the characters typed in the “Password” box,

select “Show Password”.

• If your network requires specific settings, deselect

“DHCP” to disable DHCP.

– You can use specific IP address, subnet mask,

default gateway, primary DNS, etc.

• To update the network name (SSID) list, select

“Refresh list”.

Select “Connect” to apply the settings.

• On the main unit’s display, “Success” appears when

the connection is established. (“ ” will be

displayed.)

– If “Fail” is displayed press [OK], check the network

name (SSID) and the password, and then try the

setting again.

• Depending on the device, the connection complete

screen may not be displayed.

Make sure to connect your compatible device

back to your home wireless network.

Note:

• Enable Java and Cookies in your browser settings.

The operations and on-screen display items, etc. of

the app “Panasonic Music Streaming” are subject to

change.

For the latest information, visit

http://panasonic.jp/support/global/cs/audio/app/

(This site is in English only.)

Method 3:

Using an Internet browser

Settings

Wi-Fi settings

●●●●●●●●

Refresh list

SC-PMX152-150B_EGEBGN-TQBJ0992.book 7 ページ２０１７年３月１６日　木曜日　午後６時１２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-PMX152 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-PMX152

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info