Bedienungsanleitung Panasonic SCAK230 (Seite 12 von 16) (Englisch)

612684

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

RQT7790

H.BASS

Using the play/record timer

Remote control only

You can set the timer to come on at a certain time to wake you up

(play timer) or to record a radio station or from the aux source (record

timer).

The play and record timers cannot be used together.

Preparations:

•

Turn the unit on and set the clock (A page 11).

•

For the play timer, prepare the desired music source (tape/disc/

radio/aux), and set the volume.

•

For the record timer, check the cassette’s erasure prevention tabs

(A page 11) and insert the tape in deck 2 (A page 11). Tune to the

radio station (A page 10) or select the aux source (A page 13).

1 Press [SHIFT] + [CLOCK/TIMER] to select the timer

function.

Every time you press the button:

rPLAY: to set the play timer

rREC: to set the record timer

(Proceed to the next step within 8 seconds)

2 ON time setting

1 Press [g, REW/3] or [f, 4/FF] to set the time.

2 Press [SHIFT] + [CLOCK/TIMER].

OFF time setting

Repeat steps 1 and 2.

3 Press [SHIFT] + [rPLAY/REC] to display the timer

indicator.

Every time you press the button:

RECPLAY

(off)

rPLAY: to turn the play timer on

rREC: to turn the record timer on

(The indicator doesn’t appear if the ON and OFF times or the

clock hasn’t been set.)

Timers

Previous display

CLOCK RECPLAY

4 Press [

f] to turn the unit off.

The unit must be off for the timers to operate.

•

Play timer: Play will start in the set condition at the set time

with volume increasing gradually to the set level.

•

Record timer: The unit comes on 30 seconds before the set

time with the volume muted.

To cancel the timer

Press [SHIFT] + [rPLAY/REC] to clear the timer indicator from the

display.

(The timer comes on at the set time everyday if the timer is on.)

To change the settings (when the unit is on)

To change the play/record times

Do steps 1, 2 and 4.

To change the source or volume

1. Press [SHIFT] + [rPLAY/REC] to clear the timer indicator from the

display.

2. Make changes to the source or volume.

3. Do steps 3 to 4.

To check the settings

Press [SHIFT] + [CLOCK/TIMER] while the unit is on to select “rPLAY”

or “rREC”.

The settings are shown in the following order:

Play timer: on time→off time→source→volume

Record timer: on time→off time→source

To check the settings while the unit is off, press [SHIFT] + [CLOCK/

TIMER] twice.

If you use the unit after the timers are set

After using, check that the correct tape/disc are loaded before

turning the unit off.

Note

•

If you turn the unit off and on again while a timer is functioning, the

OFF time setting will not be activated.

•

If you selected AUX as the source, when the timer comes on, the

unit turns on and engages “AUX” as the source. If you want to

playback or record from a connected unit, set that unit’s timer to the

same time. (See the connected unit’s instruction manual.)

Using the sleep timer

Remote control only

This timer turns the unit off after a set time.

While enjoying the desired source:

Press [SLEEP] to select the time (minutes).

Every time you press the button:

SLEEP 90 SLEEP 120SLEEP 60SLEEP 30

SLEEP OFF

To cancel the sleep timer

Press [SLEEP] to select “SLEEP OFF”.

To confirm the remaining time

Press [SLEEP] once.

The remaining time is shown for about 5 seconds.

To change the setting

Press [SLEEP] to select the new setting.

You can use the sleep timer in combination with the play/record timer.

Make sure the unit is off before the play/record timer’s start time.

Note

The sleep timer will be turned off when you start recording.

Timers

a, REC

AUX

PHONES

Headphones

(not included)

VOLUME

AUTO OFF

SLEEP

CLOCK/TIMER

rPLAY/REC

DIMMER

SHIFT

, REW/3,

, 4/FF

MUTING

PRESET EQ

AK330

AK333

H.BASS or

AK230

SUPER

SOUND EQ

DISP, –DEMO

AK330

AK333

H.BASS or

AK230

S.SOUND EQ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCAK230 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCAK230

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info