Bedienungsanleitung Panasonic SCAK230 (Seite 11 von 16) (Englisch)

612684

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

RQT7790

You can use either deck 1 or deck 2 for tape playback.

Use normal position tapes.

High position and metal position tapes can be played, but the unit will

not be able to do full justice to the characteristics of these tapes.

1 Press [:, TAPE].

The unit comes on.

If a cassette was loaded, play starts automatically (One touch play).

2 Press [c DECK1] or [DECK2 c] and insert the cassette.

Insert with the side to be played

facing towards you and the

exposed tape facing down.

Close the holder by hand.

3 Press [:, TAPE] to start playback.

To play on the other side of the tape, turn the tape over and press

[:, TAPE].

To stop tape playback

Press [L, STOP].

To fast-forward or rewind

Press [g/REW/3] (rewind) or [f/FF/4] (fast-forward).

To select between loaded decks

Press [DECK 1/2] (remote control: [PLAY MODE]).

Note

•

Tape playback is momentarily interrupted if you open the other deck.

•

Tapes exceeding 100 minutes are thin and can break or get caught

in the mechanism.

•

Tape slack can get caught up in the mechanism and should be

taken up before the tape is played.

•

Endless tapes can get caught up in the deck’s moving parts if used

incorrectly.

Cassettes

Front side

Playback

Recording

To stop recording

Press [L, STOP].

If the tape finishes before the disc

The disc continues playing. Press [L, STOP] to stop it.

To record on the other side of the tape

Turn the tape over and press [a, REC].

Note

•

Changes to volume and sound/field quality do not affect recording.

•

You cannot open deck 1 while recording.

•

You cannot fast-forward or rewind one deck while recording with

the other.

•

When recording an AM broadcast, sound is momentarily interrupted

when you start and stop the recording.

Erasure prevention

Use a screwdriver or similar object to break out the tab.

To re-record on a protected cassette

Cover the hole with adhesive tape.

To erase a tape

1. Press [:, TAPE] and then [L, STOP].

2. Insert the recorded tape into deck 2.

Ensure there is no tape in deck 1.

3. Press [a, REC].

Selection of tapes for recording

Use normal position tapes.

High position and metal position tapes can be used, but this unit will

not be able to record or erase them correctly.

Preparation:

Wind up the leader tape so recording can begin immediately.

1 Press [DECK2 c] and insert the cassette to be recorded.

Insert with the side to be recorded facing towards you and the

exposed tape facing down.

2 Select the source to be recorded.

Radio recording:

Tune in the station. (A page 10)

Disc recording:

1 Insert the disc(s) you want to record.

Press [:/J, CD] and then [L, STOP].

2 Prepare the desired disc recording mode.

Remote control only

•

To record programmed tracks

On page 8, “Program play”, do steps:

1 ~ 3

MP3

1 ~ 4

•

To record specific discs/tracks

1. Press [PLAY MODE] to select the desired mode.

(A page 7)

2. Press [DISC] and then [1]–[5] to select the disc.

Ensure disc is stopped.

MP3

For 1-ALBUM mode and 1-SONG mode: Press

[ALBUM ( or )] to select the album.

4. For 1-SONG mode: Press [g, REW/3] or [f,

4/FF] to select the track.

Tape-to-tape recording:

1 Press [:, TAPE] and then [L, STOP].

2 Press [c DECK1] and insert the cassette you want to record.

3 Press [a, REC] to start recording.

Side A

Tab for side B

Tab for side A

Adhesive tape

Remote control only

This is a 12-hour clock.

1 Switch on the power.

2 Press [SHIFT] + [CLOCK/TIMER] to select “CLOCK”.

Every time you press the button:

3 (Within 7 seconds or so)

Press [g, REW/3] or [f, 4/FF] to set the time.

4 Press [SHIFT] + [CLOCK/TIMER] to finish setting the

time.

The display will return to whatever was displayed before you set

the time.

To display the time

Press [SHIFT] + [CLOCK/TIMER] once when the unit is on or at

standby mode.

The time is shown for about 5 seconds.

Note

Reset the clock regularly to maintain accuracy.

Previous display

CLOCK RECPLAY

Setting the time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCAK230 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCAK230

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info