Bedienungsanleitung Panasonic SCAK520 (Seite 13 von 20) (Englisch)

612736

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

RQT7330

To recall a marked track number in the current disc

During play or stop

On the remote control

Press [MARKER] to recall a marker.

On the main unit

Press [MARKER, -RECALL] to recall a marker.

Play starts from the track recalled.

Note

•

“NO MARKER” indicates that the marker in the current disc is empty.

•

The marker memory is cleared when you open the CD tray.

•

For CD-DA, you cannot use this function during 1-RANDOM play

and A-RANDOM play.

•

You cannot use this function during program mode.

Marking a track

You can mark one track each on the discs loaded so that you can

start play from them later.

To mark a track number

1 During play or stop

Select your desired track.

(For MP3, refer to “Track skip play” on page 10.

For CD-DA, press the numbered buttons on the remote control.

To select track 10 or over, press [

10] then the two digits.)

2 On the remote control

Hold down [MARKER] until “STORING” blinks on the

display.

On the main unit

Hold down [MARKER, –MEMORY] until “STORING”

blinks on the display.

The selected track is stored in the marker of the current disc.

Note

If a track is already stored in the marker, it will be replaced next time

you store a new track in the same marker.

1 Press [TUNER, BAND] to select band.

The unit comes on.

Every time you press the button:

FM ↔ AM

2 Press [PLAY MODE] on the remote control to select

“MANUAL”.

Every time you press the button:

MANUAL ↔ PRESET

3 Hold down [g/REW/3] or [f/FF/4] for a moment

to search for a station.

The frequency stops when it finds a clear station.

To stop during the process, press [g/REW/3] or [f/FF/4].

Under excessive interference, a station may not be found.

Press [g/REW/3] or [f/FF/4] repeatedly to tune step-by-

step.

“TUNED” is displayed when a radio station is tuned.

“ST” is displayed when a stereo FM broadcast is being

received.

If noise is excessive in FM

Remote control only

Hold down [PLAY MODE] to display “MONO”.

Monaural sound is selected and noise reduces when reception is

weak.

Hold down [PLAY MODE] again to cancel the mode.

“MONO” is also cancelled if the frequency is changed.

Preparation:

Press [TUNER, BAND] to select “FM” or “AM”.

Automatic presetting

Do the following once each for FM and AM.

Preparation: Tune to the frequency where pre-setting is to begin.

Hold down [PROGRAM] until the frequency changes.

The tuner presets all the stations it can receive into the channels in

ascending order. When finished, the last station memorized is tuned in.

Manual presetting

Pre-set the stations one at a time.

1 Press [PROGRAM] then press [g, REW/3 ] or

[f, 4/FF] to tune to the desired station.

2 Press [PROGRAM] then press [g, REW/3 ] or

[f, 4/FF] to select a channel.

3 Press [PROGRAM].

The station occupying a channel is erased if another station is preset

in that channel.

Selecting channels

Press the numbered buttons to select the channel.

To enter channel 10 or over, press [>10], then the two digits.

1 Press [PLAY MODE] to select “PRESET”.

2 Press [g, REW/3] or [f, 4/FF] to select the

channel.

Remote control only

There are two methods of pre-setting stations.

Automatic presetting : All the stations the tuner can receive are

preset.

Manual presetting : You can select the stations to preset and the

order they are preset in.

Up to 15 stations each can be set in the FM and AM bands.

Radio

Manual tuning

Preset tuning

How discs with MP3 differ from CDs

To receive FM broadcasts allocated in 0.1 MHz steps

Main unit only

Hold down [TUNER, BAND]. The display changes in a few seconds to

show the current minimum FM frequency. Continue to hold down the

button until the minimum frequency changes. The step is changed.

Repeat the above to change the step back.

Note

•

After changing the “allocation” setting, the frequencies you previously

preset in the memory will be cleared.

•

Sound is momentarily interrupted if you load/unload tapes while

listening to an AM broadcast.

Radio

AK520

AK523

AK520

AK523

AK320

AK323

AK520

AK523

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCAK520 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCAK520

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info