Bedienungsanleitung Panasonic SCAK520 (Seite 14 von 20) (Englisch)

612736

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

RQT7330

You can use either deck 1 or deck 2 for tape playback.

Use normal position tapes.

High position and metal position tapes can be played, but the unit will

not be able to do full justice to the characteristics of these tapes.

1 Press [:, TAPE].

The unit comes on.

If a cassette was loaded, play starts automatically (One touch play).

2 Press [c, DECK 1] or [c, DECK 2] and insert the

cassette.

Insert with the side to be played

facing towards you and the

exposed tape facing down.

Close the holder by hand.

3 Press [:, TAPE] to start playback.

To play on the other side of the tape, turn the tape over and press

[:, TAPE].

To stop tape playback

Press [L, STOP].

To fast-forward or rewind

Press [g/REW/3] (rewind) or [f/FF/4] (fast-forward).

To select between loaded decks

Press [DECK 1/2] (remote control: [PLAY MODE]).

Note

•

Tape playback is momentarily interrupted if you open the other deck.

•

Tapes exceeding 100 minutes are thin and can break or get caught

in the mechanism.

•

Tape slack can get caught up in the mechanism and should be

taken up before the tape is played.

•

Endless tapes can get caught up in the deck’s moving parts if used

incorrectly.

Cassettes

Front side

Side A

Tab for side B

Tab for side A

Adhesive tape

Selection of tapes for recording

Use normal position tapes.

High position and metal position tapes can be used, but this unit will

not be able to record or erase them correctly.

Preparation:

Wind up the leader tape so recording can begin immediately.

1 Press [c, DECK 2] and insert the cassette to be

recorded.

Insert with the side to be recorded facing towards you and the

exposed tape facing down.

2 Select the source to be recorded.

Radio recording:

Tune in the station. (A page 13)

CD recording:

1 Insert the CD(s) you want to record.

Press [:/J, CD] and then [L, STOP].

2 Prepare the desired CD recording mode.

Remote control only

•

To record programmed tracks (A do steps 1–3 on page 9

for CD-DA or steps 1–4 on page 10 for MP3).

•

To record specific CDs/tracks

1. For CD-DA, do steps 1 to 2 on page 8: “To listen to

specific CDs and tracks (CD Play Mode function)”.

For MP3, do steps 1 to 2 on page 9: “CD Play Mode

function for MP3”.

Ensure CD is stopped.

2. (MP3 only) For 1-ALBUM mode and 1-SONG mode:

Press [ALBUM ( or )] to select the album.

3. For 1-SONG mode: Press [g, REW/3] or [f,

4/FF] to select the track.

Tape-to-tape recording:

1 Press [:, TAPE] and then [L, STOP].

2 Press [c, DECK 1] and insert the cassette you want to record.

3 Press [a, REC] to start recording.

To stop recording

Press [L, STOP].

If the tape finishes before the CD

The CD continues playing. Press [L, STOP] to stop it.

To record on the other side of the tape

Turn the tape over and press [a, REC].

Reducing noise when recording AM

Remote control only

Hold down [PLAY MODE] while recording.

Every time you hold down the button: BP1 ↔ BP2

Choose the setting with the least noise.

Note

•

Changes to volume and sound/field quality do not affect recording.

•

You cannot open deck 1 while recording.

•

You cannot fast-forward or rewind one deck while recording with

the other.

•

When recording an AM broadcast, sound is momentarily interrupted

when you start and stop the recording.

Erasure prevention

Use a screwdriver or similar object to break out the tab.

To re-record on a protected cassette

Cover the hole with adhesive tape.

To erase a tape

1. Press [:, TAPE] and then [L, STOP].

2. Insert the recorded tape into deck 2.

Ensure there is no tape in deck 1.

3. Press [a, REC].

Playback

Recording

VOL

7 8 9

SHI

SH I

CLOCK

CLOC K

TIMER

T I M E R

REC

RE C

AU TO OFF

O O FF

INTRO

IN TRO

UND EQ

PRE

SET EQ

T EQ

MUT

ING

ENTER

EN TER

MARKER

MARK E R

TITLE

TI TLE

SE ARC H

RE W FF

PROG

R AM

REP

E AT

PL AY MOD E

AY MO D E

DISC

SPACE

SPA C E

ABC

DEF

GHI

TUV

WXY

W X Y

ZPQRS

PQRS

JKL

MNO

SL EEP

EE P

CD DISP

CD D I S P

DIMMER

DIMM E R

AL BUM

BUM

CURSOR

CURSO R

DEL

TAPE

AUX

CLEAR

LEAR

TUNER

BAND

S.WOOFER

PLAY MODE

SHIFT

AUX

TAPE

DECK 1/2

, REC

DECK 1

PRESET EQ

DISP, –DEMO

SUBWOOFER

ALBUM ( or )

DECK 2

PHONES

only)

AK520

( and

AK523

S.SOUND EQ

S.WOOFER

only)

AK520

( and

AK523

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCAK520 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCAK520

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info