Bedienungsanleitung Panasonic SCALL5CDGN (Seite 21 von 32) (Englisch)

612777

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RQT0A22

The remote control does not work properly.

≥ The battery is depleted or inserted incorrectly. (l 4)

Incorrect display or play does not start.

≥ Make sure that the disc is compatible with this unit. (l 24)

≥ There is moisture on the lens. Wait for about an hour and then try

again.

No response when [1/;] is pressed.

≥ Disconnect the USB device and then reconnect it. Alternatively,

turn the unit off and on again.

The USB drive or its contents cannot be read.

≥ The USB drive format or its contents is/are not compatible with the

unit (l 24).

≥ The USB host function of this product may not work with some

USB devices.

Slow operation of the USB flash drive.

≥ Large file size or high memory USB flash drive takes longer time

to read.

The elapsed time displayed is different from the

actual play time.

≥ Copy the data to another USB device or backup the data and

reformat the USB device.

DAB+ reception is poor.

≥ Keep the antenna away from computers, televisions, other cables

and cords.

≥ Use an outdoor antenna (l 5).

Static or noisy reception is heard while listening to

a radio broadcast.

≥ Confirm the antenna is properly connected. (l 5)

≥ Adjust the position of the antenna.

≥ Try to keep a certain amount of distance between the antenna and

AC mains lead.

≥ Try using an outdoor antenna if there are buildings or mountains

nearby. (l 5)

≥ Turn the TV or other audio players off or separate it from this unit.

≥ Keep this unit away from mobile phones if there is interference.

Pairing cannot be completed.

≥ Check the Bluetooth

device condition.

The device cannot be connected.

≥ The pairing of the device was unsuccessful or the registration has

been replaced. Try re-pairing the device. (l 11)

≥ This unit might be connected to a different device. Disconnect the

other device and try re-pairing the device. (l 11)

≥ If the problem persists, turn the unit off and on, then try again.

The device is connected, but audio cannot be

heard through this unit.

≥ For some built-in Bluetooth

devices, you have to set the audio

output to “SC-ALL5CD” manually. Read the operating instructions

for the device for details.

The sound is interrupted.

≥ The device is out of the 10 m communication range. Place the

Bluetooth

device closer to this unit.

≥ Remove any interference between this unit and the device.

≥ Other devices that use the 2.4 GHz frequency band, such as

wireless routers, microwaves, cordless phones, etc. are

interfering. Place the Bluetooth

device closer to this unit and

distance it from the other devices.

≥ Select “MODE 1” for stable communication. (l 12)

The One-Touch Connection (NFC feature) is not

working.

≥ Make sure the unit and the NFC feature of the device are turned

on. (l 11)

Cannot connect to the network.

≥ Confirm the network connection and settings. (l 7)

≥ If the network is set to be invisible, make the network visible while

you set up the network for this unit or make a wired LAN

connection. (l 8)

≥ This system’s Wi-Fi security supports WPA2

only. Your wireless

router must therefore be WPA2

compatible. For details on the

security supported by your router and how to change the settings,

please refer to the operating instructions or contact your Internet

service provider.

≥ Make sure that the multicast function on the wireless router is

enabled.

≥ Depending on the routers, WPS button may not work. Try other

methods. (l 7)

≥ Check the “WIRELESS LAN” setting. (l 19)

Cannot select this system as the output speakers.

≥ Make sure that the devices are connected to the same network as

this system.

≥ Reconnect the devices to the network.

≥ Turn the wireless router off and then on.

≥ Turn this system off and on, and then select this system as the

output speakers again.

Playback does not start.

The sound is interrupted.

≥ If using the 2.4 GHz band on the wireless router, simultaneous

use with other 2.4 GHz devices, such as microwaves, cordless

telephones, etc., may result in connection interruptions. Increase

the distance between this unit and these devices.

– If your wireless router supports 5 GHz band, try using the

5 GHz band.

To change to the 5 GHz band, redo the network settings using

an Internet browser (l 7). On the step 8, make sure to select

your network name (SSID) for the 5 GHz band.

≥ Do not place this system inside a metal cabinet, for it might block

the Wi-Fi signal.

≥ Place this system closer to the wireless router.

≥ If several wireless devices are simultaneously using the same

wireless network as this system, try turning off the other devices

or reducing their wireless network usage.

≥ If the playback stops, check the playback status on the device.

≥ Reconnect the devices to the network.

≥ Turn the wireless router off and then on.

≥ Try a wired LAN connection. (l 8)

Remote control

Disc

USB

Radio

Bluetooth

Network

SC-ALL5CD-EGEBGN~RQT0A22.book 21 ページ２０１５年４月２３日　木曜日　午後４時４４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCALL5CDGN Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCALL5CDGN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info