Bedienungsanleitung Panasonic SCALL70TEB (Seite 37 von 48) (Englisch)

612779

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Reference

SQT0935

Pairing cannot be done.

Check the Bluetooth

device condition.

The device cannot be connected.

≥ The pairing of the device was unsuccessful or

the registration has been replaced. Try pairing

the device again. (> 27)

≥ This system might be connected to a different

device. Disconnect the other device and try

pairing the device again.

The device is connected but audio cannot be

heard through this system.

For some Bluetooth

devices, you have to set

the audio output to “SC-ALL70T” manually.

Read the operating instructions for the device

for details.

Connection is interrupted.

Sound is interrupted/sound skips/there is a

lot of noise.

≥ Remove any obstacle between the main unit

and the device.

≥ Other devices that use the 2.4 GHz frequency

band (wireless router, microwaves, cordless

phones, etc.) are interfering. Bring the

Bluetooth

device closer to the main unit and

distance it from the other devices.

≥ Select “MODE 1” for stable communication.

(> 30)

If the above does not fix the problem, you may

be able to fix the problem by reconnecting this

unit and the Bluetooth

device. (> 27)

The One-Touch Connection (NFC feature) is

not working.

≥ Make sure the main unit and the NFC feature

of the device are turned on. (> 27)

≥ Change the touch location of the Bluetooth

device or main unit and then touch the NFC

touch area again.

No sound (or image).

≥ Turn muting off. (> 23)

≥ Check the connections to the other devices.

(> 9, 10, 11)

≥ Make sure that the received audio signal is

compatible with this system. (> 42)

≥ Turn this system off and then on again.

≥ If the main unit is connected to the TV with

only an HDMI cable, make sure that the TV’s

HDMI terminal is labelled “HDMI (ARC)”. If

not, connect using the optical digital audio

cable. (> 9)

≥ If the main unit is connected to a Panasonic

TV and turned on using the remote control or

the touch key on the main unit, sound might

not be output from this system. In this case,

turn the main unit on using the TV’s remote

control. (> 33)

≥ If the connections are correct, there might be

a problem with the cables. Redo the

connections with different cables.

≥ Check the audio output settings on the

connected device.

The dual audio cannot be changed from

main to secondary.

If the audio received from the connected device

is not “Dolby Dual Mono” or the output setting is

not “Bitstream”, the setting cannot be changed

from this system. Change the setting on the

connected device.

The volume is lowered when the main unit is

turned on.

“VOL LIMITATION” is on.

If the main unit is turned off with the volume

setting in the greater half (above 50), the main

unit will automatically lower the volume to the

middle (50) when the main unit is turned on.

(> 30)

Bluetooth

Sound

SC-ALL70T-SQT0935.book 37 ページ２０１５年４月２８日　火曜日　午前１０時５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCALL70TEB Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCALL70TEB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info