Bedienungsanleitung Panasonic SCALL70TEB (Seite 38 von 48) (Englisch)

612779

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

SQT0935

The dialogue is too persistent or the

dialogue does not sound natural.

This system has a function to make the dialogue

stand out when the volume is low. (> 29)

The sound lags behind the image.

Depending on the TV, when this unit is

connected to it via Bluetooth

, the sound output

from this unit may lag behind the TV image.

Connect this unit and the TV with an HDMI

cable/optical digital audio cable. (> 9, 10)

Sound stops.

The power of the main unit turns off

automatically.

(When the main unit detects a problem, a safety

measure is activated and the main unit

automatically switches to standby mode.)

≥ There is a problem with the amplifier.

≥ Is the volume extremely high?

If so, lower the volume.

≥ Is this system placed in an extremely hot

place?

If so, move this system to a cooler place and

wait a few moments and then try to turn it on

again.

If the problem persists, confirm the display, turn

this system off, remove the AC mains lead cord

and consult your dealer. Please be sure to

remember the display that was indicated and

inform the dealer.

Cannot connect to the network.

≥ This system’s Wi-Fi security supports WPA2

only. Your wireless router must therefore be

WPA2

compatible. For details on the

security supported by your router and how to

change the settings, please refer to the

operating instructions or contact your Internet

service provider.

≥ If the network is set to be invisible, make the

network visible while you set up the network

for this system or make a wired LAN

connection. (> 22)

≥ Make sure that the multicast function on the

wireless router is enabled.

≥ Depending on the routers, WPS button may

not work. Try other methods. (> 19)

Cannot select this system as the output

speakers.

≥ Make sure that the devices are connected to

the same network as this system.

≥ Reconnect the devices to the network.

≥ Turn off and then on the wireless router.

Playback does not start.

The sound is interrupted.

≥ If using the 2.4 GHz band on the wireless

router, simultaneous use with other 2.4 GHz

devices, such as microwaves, cordless

telephones, etc., may result in connection

interruptions. Increase the distance between

this system and these devices.

jIf your wireless router supports 5 GHz band,

try using the 5 GHz band.

To change to the 5 GHz band, restore the

factory defaults (

35), and redo the network

settings using an Internet browser (

20).

On the step 8, make sure to select your

network name (SSID) for the 5 GHz band.

≥ Do not place this system inside a metal

cabinet, for it might block the Wi-Fi signal.

≥ Place this system closer to the wireless router.

≥ If several wireless devices are simultaneously

using the same network as this system, try

turning off the other devices or reducing their

network usage.

≥ Reconnect the devices to the network.

≥ Turn off and then on the wireless router.

≥ Try a wired LAN connection. (> 22)

≥ Restart the app.

Network

SC-ALL70T-SQT0935.book 38 ページ２０１５年４月２８日　火曜日　午前１０時５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCALL70TEB Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCALL70TEB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info