Bedienungsanleitung Panasonic SCHT1000PP (Seite 51 von 56) (Englisch)

613117

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

RQT7061

INFO

Glossary

CPRM (Content Protection for Recordable Media)

CPRM is the copyright protection technology that is used to protect

broadcasts that are allowed to be recorded only once (e.g. some

CATV broadcasts).

Decoder

A decoder restores the coded audio signals on DVDs to normal.

Dolby Digital

This is a method of coding digital signals developed by Dolby

Laboratories. Apart from stereo (2-channel) audio, these signals can

also be multi-channel audio. A large amount of audio information can

be recorded on one disc using this method.

This unit is set to record using Dolby Digital in all recording modes.

Dolby Pro Logic II

Dolby Pro Logic II is an advanced decoder that derives 5 channel

surround (Left, Center, Right, Left and Right Surround) from any

stereo program material, whether or not it has been specifically

Dolby Surround encoded. Pro Logic II provides two full-range

surround channels, as opposed to Pro Logic’s single surround

channel.

DTS (Digital Theater Systems)

This surround system is used in many movie theaters around the

world. There is good separation between the channels, so realistic

sound effects are possible.

Film and video

DVD-Videos are recorded using either film or video. Usually, film is

recorded at 24 frames per second, the rate movies are filmed at,

while video is recorded at 30 frames per second.

Frame still and field still

Frames are the still pictures that make moving pictures. About thirty

are shown each second. A frame still may appear blurred but overall

quality is high.

Two fields appear alternately to make up one frame. A field still is not

blurred but picture quality is lower.

Interlace and progressive output

NTSC, the video signal standard, has 480 interlaced (I) scan lines,

whereas progressive scanning uses twice the number of scan lines.

This is called 480P.

I/P/B

MPEG 2, the video compression standard adopted for use with

DVD-Video, codes frames using these 3 picture types.

I: Intra coded picture

This picture has the best quality and is the best to use when

adjusting the picture.

P: Predictive coded picture

This picture is calculated based on past I- or P-pictures.

B: Bidirectionally-predictive coded picture

This picture is calculated by comparing past and future I- and

P-pictures so it has the lowest volume of information.

Linear PCM (pulse code modulation)

These are uncompressed digital signals, similar to those found on

CDs. LPCM sound is available when recording in XP mode.

Playback control (PBC)

If a Video CD has playback control, you can select scenes and

information with menus.

Pan&Scan/Letterbox

In general, DVD-Video are produced with the intention that they be

viewed on a widescreen television with an aspect ratio of 16:9. This

means you can view most material with the intended aspect ratio on

a widescreen television.

Material with this ratio will not fit onto a standard television with an

aspect ratio of 4:3. Two styles of picture, “Pan&Scan” and

“Letterbox”, deal with this problem.

Pan&Scan: The sides are cut off so the picture

fills the screen.

Letterbox: Black bands appear at the top and

bottom of the picture so the picture

itself appears in an aspect ratio of

16:9.

Listening caution

Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to

consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s

Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come

through loud and clear without annoying blaring or distortion—and, most importantly, without affecting your sensitive hearing.

We recommend that you avoid prolonged exposure to excessive noise.

Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be

loud and harmful to your hearing.

Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

≥Start your volume control at a low setting.

≥Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.

Once you have established a comfortable sound level:

≥Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime.

EST. 1924

7061en.book 51 ページ２００３年６月１６日　月曜日　午前１０時１２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT1000PP Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info