Bedienungsanleitung Panasonic SCHT1000PP (Seite 49 von 56) (Englisch)

613117

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

RQT7061

INFO

Recording and timer recording Page

Play

Displays

Cannot record. ≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the

unit can record onto.

≥The disc is unformatted. Format the disc so this unit can record on it. [RAM]

≥The write-protect tab on the cartridge is set to PROTECT.

≥Some programs have limitations on the number of times they can be recorded (CPRM).

≥The disc is protected with DISC SETTING.

≥The disc is full or nearly full. Erase unneeded programs or use another disc.

≥You cannot record on finalized DVD-R discs.

≥Audio from FM/AM broadcasts and the L1 OPTICAL IN terminal cannot be recorded.

—

VCR Plusr programming does

not work properly.

≥The guide channels are incorrect. Go to the Channel menu and correct them with “VCR Plusi

CH Setting”.

≥The clock is wrong. Go to the Set Up menu and correct it with Clock settings.

Timer recording does not work

properly.

≥The timer program is incorrect. Correct the program.

≥The unit is not on timer recording standby. (“F” on the unit’s display is not on.) Press [Í

POWER] to turn the unit off and make sure that “F” is on.

≥Different timer program times overlap.

≥The clock is wrong. Go to the Set Up menu and correct it with Clock settings.

—

The unit switches to standby

while making a timer recording.

≥The disc has run out of space. Use a disc that has enough space to record the program. —

The timer program remains

even after recording finishes.

≥The timer program remains if set to daily or weekly. 15

Timer recording does not stop

even when [∫] is pressed.

≥Press [∫] and then [ENTER] within 5 seconds to turn “F” off. Recording stops. —

The available recording time

doesn’t increase even after

erasing recordings on the disc.

≥As this unit is unable to erase data written to DVD-RAM with a computer, the available

recording time does not increase. The data will be erased if you reformat the disc.

≥If the disc is dirty, wipe with the DVD-RAM/PD disc cleaner (optional) before formatting.

≥Available recording space on the DVD-R does not increase even after erasing previously

recorded programming.

—

A part or whole of a recorded

program has been lost.

≥If there is a power failure or the plug is disconnected from the household AC outlet while

recording or editing, the program may be lost or the disc may become unusable.

➡ We cannot offer any guarantee regarding lost programs or discs. You will have to format the

disc or use a new disc.

—

Play fails to start even when [1]

(PLAY) is pressed.

Play starts but then stops

immediately.

≥Insert the disc correctly with the label facing up.

≥This unit cannot play discs other than the ones listed in these operating instructions.

≥The disc is dirty. Clean it.

≥The disc may be badly scratched.

≥You inserted a blank DVD-RAM or DVD-R.

≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.

—

A title or chapter doesn’t play

when it is selected.

≥Some titles and chapters on DVD-Video are not played when you have changed the ratings

level.

Picture distorted during search. ≥Some distortion is normal. —

Alternative soundtrack and

subtitles cannot be selected.

≥The languages are not recorded on the disc.

≥You may have to use the disc’s menus to select languages.

—

No subtitles. ≥Subtitles are not recorded on the disc.

≥Turn the subtitles on.

≥Subtitles around markers may fail to appear.

—

Angle cannot be changed. ≥This function depends on software availability. Angles can only be changed during scenes

where different angles are recorded.

—

You have forgotten your ratings

password.

≥Return the ratings setting to “8”.

While the disc tray is open, press and hold [4] and [5] on the main unit at the

same time for 5 or more seconds.

—

The display is dim. ≥Go to the Display menu and change the display’s brightness with “FL Display”. 39

“12:00” is flashing on the unit’s

display.

≥The clock is not set. 43

The displayed recording time

and actual recording time differ.

≥Displayed recording time is based on the number of frames per second. This number is

subject to minute variations. When recording over long periods, these variations may result in

the difference between displayed recording time and actual recording time. This is normal.

—

The display doesn’t show the

correct time. [MP3]

≥Times may not appear correctly when searching through tracks recorded with a variable bit

rate.

—

7061en.book 49 ページ２００３年６月１６日　月曜日　午前１０時１２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT1000PP Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info