Bedienungsanleitung Panasonic SCHT1000PP (Seite 47 von 56) (Englisch)

613117

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

RQT7061

INFO

Error messages

On the television Page

On the unit’s display

Cannot finish recording

completely.

≥The program was copy-guarded.

≥No space left on the disc.

➡ Create space by erasing any unwanted programs. [RAM]

➡ Use a new disc. [RAM] [DVD-R]

≥Recording was not completed for some other reason.

—

Cannot record on the disc. ≥The disc is scratched. Use another disc.

≥The disc is dirty.

≥You inserted an incompatible disc.

—

Contents of this disc are

protected.

≥The program is write-protected. Cancel the protection.

≥The disc is write-protected. Cancel Disc Protection.

Disc is full. ≥No space left on the disc.

➡ Create space by erasing any unwanted programs. [RAM]

➡ Use a new disc. [RAM] [DVD-R]

—

Error has occurred. Please

press ENTER.

≥A serious, but temporary error has occurred and one of the unit’s safety devices has

activated. Press [ENTER]. The unit switches to the standby mode. Press [Í POWER] to

turn the unit on again.

—

Finalizing is necessary for

compatible playback.

≥To enable playback of your DVD-R on compatible equipment, it is necessary to finalize it. 33

No disc. ≥You haven’t inserted a disc. Correctly insert a disc that this unit can use.

≥The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.

Please check write protect tab

on the disc.

≥The write-protect tab on the cartridge is set to PROTECT.

Use a ballpoint pen or similar to release the write protection.

—

Please set clock. ≥The clock is not set. 43

This disc cannot be read. ≥You inserted an incompatible disc. 8

This disc may not be played in

your region.

≥You tried to play a disc with a region number different from this unit’s region number. This

unit can only play discs with the region numbers compatible with this unit (1, All, or

including the number 1).

Cover

page

This is non-recordable disc. ≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R.

≥You inserted an unformatted DVD-RAM. Format the disc with this unit.

This disc is not formatted

properly.

Please format the disc in ‘DISC

SETTING’ to record.

Your selection exceeds the

recorder’s rating limit.

≥A ratings level has been set for DVD-Video with this unit. Unlock the unit with “Ratings” in

“Disc”.

PROTECT

 CHK REMOTE

(“∑” stands for a number.)

≥The remote control and main unit are using different codes. Change the code on the

remote control or main unit.

AF F61 ≥Check and correct the speaker cord connections.

If this does not fix the problem, there is a power supply problem. Consult the dealer.

Setup

Guide

DIGITAL UNLOCK ≥There is no signal input to the L1 OPTICAL IN terminal.

➡ Make sure to check the connections and if the power of the connected equipment is

turned on.

—

NO READ ≥The disc is dirty or badly scratched.

➡ Clean the disc if it is dirty.

➡ The disc cannot be played if it is scratched and this display doesn’t disappear.

≥The unit cannot read the disc.

≥You have used a DVD-RAM/PD lens cleaner and it has finished.

—

SELF CHECK ≥There was a power failure or the AC plug was disconnected while the power was on. The

unit is carrying out its recovery process. Wait until the message disappears.

—

U14 ≥The unit is hot.

➡ The unit switches to standby automatically for safety reasons and you cannot operate it.

Wait for about 30 minutes for the service number to disappear.

➡ Select a position with good ventilation when installing the unit.

➡ Do not block the cooling fan on the rear of the unit.

—

U99 ≥The unit fails to operate properly. Press [Í POWER] to switch the unit to standby. Now

press [Í POWER] again to turn the unit on.

—

UNSUPPORT ≥You have inserted a disc the unit cannot play or record on.

≥The signal input into the L1 OPTICAL IN terminal is not Dolby Digital or Linear PCM.

—

7061en.book 47 ページ２００３年６月１６日　月曜日　午前１０時１２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT1000PP Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info