Bedienungsanleitung Panasonic SCHT1500 (Seite 41 von 52) (Englisch)

18686

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

RQT7619

SETTINGS

Refer to the control reference on page 39.

Preparation:

If the television program list has already been downloaded, return the

unit to the factory preset condition using the steps indicated below.

When the unit is on and stopped

1 Press and hold [X CH] and [W CH] on the main unit for about

five seconds.

The unit turns off.

2 Press [Í POWER] to turn the unit on.

Complete the TV Guide On Screen

system setup (until [ENTER]

is pressed after the “Watch TV” message screen is displayed).

[Note]

You can set timer recording only manually after you set the unit with

“Auto Channel Setting”.

1 Press [FUNCTIONS].

Press [

] to select “SETUP” and press [ENTER].

Press [

] to select “Channel” and press [

4 Press [3, 4] to select “Auto Channel

Setting” and press [ENTER].

Press [

] to select “Yes” and press [ENTER].

6 Press [ENTER].

Auto Channel Setting starts.

This takes a few minutes.

The unit then proceeds with

Auto Clock Setting. The time is

displayed when finished.

≥DST, Daylight Saving Time, shows the summertime setting.

≥TIME ZONE shows the time difference from Greenwich

meantime (GMT).

EST (Eastern Standard Time) l GMT j5

CST (Central Standard Time) l GMT j6

MST (Mountain Standard Time) l GMT j7

PST (Pacific Standard Time) l GMT j8

AST (Alaska Standard Time) l GMT j9

HST (Hawaii Standard Time) l GMT j10

For other areas: xx hr

≥If the Auto Clock Setting does not start automatically, select

“Auto Clock Setting” from the “Set Up” tab.

≥If the time was not set correctly, use manual clock setting

(➡ page 7) or time zone adjust.

7 Press [ENTER].

≥The unit configures channels according to the Antenna

System settings as follows.

Tabs Menus Options (Underlined items are the factory presets.)

Audio

Continued

Speaker

Set the delay time for your center and surround speakers

Multi Channel

Center: 0.0/1.0/2.0/3.0/4.0/5.0 ms

Surround (L/R): 0.0/5.0

/10.0/15.0 ms

Values

If distance a or b is greater than or equal to distance c, set to “0”.

If distance a or b is less than distance c, set as follows.

Display

Status Messages

Choose whether to show status messages automatically.

≥Automatic ≥Off

On-screen Language

Choose the language for these menus and on-screen

messages.

≥English

≥Español ≥Français

–Only English is displayed in the TV Guide On Screen

system

regardless of the settings. Other languages cannot be displayed.

Blue Background

Select “Off” if you do not want to have the unit show the blue

background when reception is weak.

≥On

≥Off

Front Display

Changes the brightness of the unit’s display.

≥Bright

≥Dim

≥Automatic:

The display turns dark during play, and reappears

momentarily if a button is pressed. When the unit is turned off

all displays disappear. While using this mode the standby

power consumption can be reduced.

b Surround speakers

Difference Setting

Approx. 150 cm (5 feet) 5.0 ms

Approx. 300 cm (10 feet) 10.0 ms

Approx. 450 cm (15 feet) 15.0 ms

≥

When you change the surround speaker setting for Dolby Digital, the setting also changes for Dolby Pro Logic

II.

a Center speaker

Difference Setting

Approx. 30 cm (1 foot) 1.0 ms

Approx. 60 cm (2 feet) 2.0 ms

Approx. 90 cm (3 feet) 3.0 ms

Approx. 120 cm (4 feet) 4.0 ms

Approx. 150 cm (5 feet) 5.0 ms

Screen

TV Type (➡ page 8) ≥Aspect 4:3 & 480I ≥Aspect 4:3 & 480P

≥Aspect 16:9 & 480I ≥Aspect 16:9 & 480P

4:3 TV Settings for DVD-Video

Select how DVD-Video widescreen picture is shown on a 4:3

standard aspect television.

≥Pan & Scan

Video recorded for a widescreen is played as Pan & Scan

(unless prohibited by the producer of the disc).

≥Letterbox:

Video recorded for a widescreen is played in the letterbox style.

4:3 TV Settings for DVD-RAM

Select how DVD-RAM widescreen picture is shown on a 4:3

standard aspect television.

≥4:3: Titles played as recorded.

≥Pan & Scan:

Video recorded for a widescreen is played as Pan & Scan.

≥Letterbox:

Video recorded for a widescreen is played in the letterbox style.

Channel/Clock settings when TV Guide On Screen

system is not used

Auto channel/clock settings

SETUP

Disc

Video

Audio

Auto Clock Setting

Auto Clock Setting is complete.

4/4/2002 12:15 AM

DST............. ON

TIME ZONE.... CST

Channel

Set Up

Antenna system Band Channel

VHF 2–13

UHF 14–69

CATV

VHF 2–13

CATV LOW BAND 95–99

CATV MID/SUPER BAND 14–36

CATV HYPER BAND 37–65

ULTRA BAND

66–94

100–125

SPECIAL CATV CHANNEL 1

7619en.book 41 ページ２００４年５月６日　木曜日　午前９時３３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT1500 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHT1500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info