Bedienungsanleitung Panasonic SCHTX5 (Seite 7 von 28) (Englisch)

618350

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

RQT9478

Installing and assembling the rack

Connection

Installation

Installing and assembling the rack

 At least 2 people are necessary for

installation.

 Use a phillips-head screwdriver. (Do not use

an electric screwdriver.)

 Choose a stable location for installation.

 Handle the glass shelf with enough carefully.

Wire dressing cover assembly

(➜ page 9)

Glass shelf assembly

(➜ page 8)

Setting the caster trays (➜ page 9)

Setup example

Removing casters

From front and back of the rack, 2 people lift

the top board at the center of the rack.

• Make sure to place the rack on a ﬂ at, stable surface so there is no

danger of it falling over. Take enough safety measures to prevent the

television from falling down. Make sure to set the caster trays when the

casters are attached.

• You can install this system so that it is ﬂ ush with the wall at the back.

Note that you will require some space for working during setup and

connection.

• Do not place in front of curtains as they may obstruct the system’s

exhaust hole.

• Avoid pressing on the speaker nets during installation.

• If the surface of the wooden ﬂ oor is soft, the caster mark may remain.

• See below for removing casters.

• Remove casters at unstable places. (thick-piled carpet, ﬂ oor made of soft materials, etc.)

• To remove the casters, reversely place the Styrofoam (marked with

✽

on page 3, packing plan) used at the upper center when

shipped, and then tip the rack back so that the top board can be put on the Styrofoam. At least 2 people are necessary for this.

If you do not have the Styrofoam, spread soft cloth such as a blanket and tip the rack to the front side slowly.

• Do not apply the load to the wire dressing part when tipping the rack back. (Remove the wire dressing cover (

➜

page 9) when it is

attached.)

• Hold and pull to remove.

• Do not put anything on and in the rack when removing casters. (You do not need to remove the ampliﬁ er and speakers as they are

ﬁ xed.)

• Make sure that at least 2 people hold the back side of the top board ﬁ rmly with hands when moving the rack after removing the

casters. (Do not hold the wire dressing part.) See the following instructions about how to lift the rack.

About the rack

 Do not put anything except for a TV. Do not put the following things in particular.

• Hot objects

This may leave the mark and it may not come off.

• Vase, etc. with water in it

Water may splash over this system when it falls down and this can cause malfunction.

How to lift the rack

This system

(Bottom plate)

Hold and pull.

Caster

Front side

Back side

Soft cloth, etc.

Styrofoam

Wire dressing part

Place so that the top

board of the rack can

be put.

Make sure that your

hands do not touch the

wire dressing part.

Note

When moving a thing placed on the top board, lift it for moving. Dragging it may damage the top board of the rack.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHTX5 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHTX5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info